Jump to content

gasgasthermo

Members
  • Posts

    108
  • Joined

  • Last visited

Posts posted by gasgasthermo
 
 
  1. What about Italian WTC 09

    post-7-1265394831.jpg

    I am not an expert on everything but I think this picture says something? (your is not short for you are)

    No red hoses or rims tho !

  2. Can you still get Alpine Stars No Stop boots ? Had them so long probably not. I don't bother to much about waterproofing as in my experience they all leak sooner or sooner. I wear sealskin socks instead.

    Yeah you can still buy them, there were some on ebay not sure if they are still listed although about

  3. My two cents. Being a 210 lb advanced rider and having owned 321s, 280s and 300s I have settled on the 280. Perfect torque and can rev cleaner than a 300. We have been building 250 Ragas in Canada for a couple of years and they are wonderful too. Just to add one more option to the list is our newest project; a 125 racing with a 225cc cylinder from S3 (super light with plenty of power). Trying to find the magic formula changes every year as the manufacturers make subtle changes to the porting etc. that make each year unique as well. Good luck.

    Spencer

    how much do these barrels and pistons cost from s3 ?

  4. i have also used one on a 125 racing using the same jets that are used in the normal ones my only problem so far is that i have snapped two slides not sure weather it is to do with bad manufacture or because the spring is two strong or weather its because of the metal tick over screw.

  5. hi i am about to repack my silencer and was wondering what packing to use.

    also i was wondering if you just drill out the rivets, remove the end cap, then hook out all the old packing and then poke packing back in then put the end cap back on. or dose the middle tube come out and then you wrap that in packing? how tight do u wrap the packing also ?? thanks in advance :banana2:

  6. I've never had trouble with the kickstart gear before until it broke on my 07 the other week. It just snapped clean off. Nothing wrong with the teeth, it snapped between the teeth and the shaft! Nightmare to get back on but works perfect now. No trouble in gettin the part either, my dealer had one in cos a few other people have had the same problem with their 07 bikes.

    same here !!!

 
×
  • Create New...