Jump to content

isaacely

Members
 View Profile  See their activity

  • Posts

    65

  • Joined

  • Last visited

 Content Type 

Everything posted by isaacely
 
 
  1. isaacely
    Try this website http://www.beta.id.au/2%20Stroke%20Fuel-Oil%20Ratios.htm
  2. isaacely
    Thanks for the help, I have managed to get it out. I have cleaned it up and painted it but I dont think I stand much chance of getting it back on without scratching the new paint!
  3. isaacely
    Hi, can anyone tell me if it is possible to remove the exhaust from a fantic 200 without removing the engine or cylinder head, I have taken off the carb and airbox but the exhaust does not seem to fit through the gap between the frame and engine. Can anyone offer any advice. Thanks.
  4. isaacely
    I thought people might be interested to see some photos I took at the Poachers pre65 event I took today at Cadwell, It made a good day out and blew away a few cobwebs. Click here to view photos http://www.flickr.com/photos/23151445@N00/...57600024052680/
  5. isaacely
    Try North Lincolnshire Classic Motorcycle Club,I have just started riding with this club recently and it is suited to older bikes and they have a novice/easy route which is a good place to start. Most of the trials are just over the Humber Bridge and they are a friendly group of people. North Lincolnshire Classic Motorcycle Club- Contact: Brian Clegg Tel: 01469 530559 Email: brian.clegg@btconnect.com
  6. isaacely
    Hi, it sounds to me like the main jet is blocked, you need to remove the float bowl and check for dirt or water, remove the main jet and blow through it to clear an obstuction. You should be able to see through the centre of the jet. Good luck Alan.
  7. isaacely
    Well done that looks a great job, be careful not to get it dirty or scratched!
  8. isaacely
    Thanks for the information
  9. isaacely
    Hi, Can anyone help me with the frame of my recently bought Bultaco Sherpa 350 199a made in 1979, The rear is different to my 250 which is one piece right round, this one is two separate sides. Please have a look at the photos and let me know if it is supposed to be like this. Thanks for the help. Alan. http://farm1.static.flickr.com/197/4424237...7fbba30da_b.jpg http://farm1.static.flickr.com/199/4424237...5af25abdc_o.jpg
 
×
  • Create New...