Jump to content

hamster

Members
  • Posts

    67
  • Joined

  • Last visited

Everything posted by hamster
 
 
  1. hiya all i just bought some octane booster does any one know how much to put in 5 litres of regular fuel as the instructions on the tin are confusing and vauge thanks in advance
  2. anyone know where spen valleys web site has gone?
  3. has any one thought of making replacement yolks for betas and others that accept the fat bars that would be nice that would
  4. one thing i find hard to get is gloves without neoprene in them of any form as in addiprene,air prene and the like as i am very allergic to it in contact with my skin i know i am not alone.i have to buy gloves and then alter then by sewing new cuffs into them its a pain in the rear they used to make them but now every glove maker seem to use neoprene
  5. hamster

    Beta Cutting Out

    on the o4 bikes the weight just screws on to the front of the fly wheel i will change the plug as soon as i can stand again (done my back in at work no trials for me for a month)
  6. hamster

    Beta Cutting Out

    i cleaned the carb out and adjusted the tick over i run well when it runs it just dies on idle then takes a few kicks to re start its a 2004 beta i dont need a new bike thanks
  7. hamster

    Beta Cutting Out

    i just put the fly wheel on my bike (it was missing when i bought it) now the bike just cut's out when idling any thing i need to change? as the bike ran sweet when it did'nt have a fly wheel weight.
  8. hamster

    Disc Sizes

    filed the lips down it works fine now.it better had as its my bosses bike
  9. hamster

    Disc Sizes

    does any one know how big the rear disc on a 2002 sy250 should be as the brake pads are wearing funny they are leaving a lip near the top of the pad
  10. hamster

    Rear Brake

    hi thanks for the suggestions sorry i took so long to reply computer broke going to try some brake pads as his are quite worn
  11. hamster

    Rear Brake

    the rear brake on my mates sy250 2002 has no power i have put a new slave cylinder piston in it and bled all the air out but it will not apply the brake the pistons move a little but not enough to bite any ideas
  12. when place the carb on a flat surface which way up should the carb be
  13. the plunger rod on the master cyclinder
  14. has any one any tips for adjusting a rear brake on a 2002 sy 250 it looks quite akward cheers
  15. hamster

    Precious Fuel

    thanks guys i posted before looking around the site and found i was not alone with my problem
  16. hamster

    Precious Fuel

    can any one tell me why my 04 rev3 p****s fuel out of the carb when ticking over do i need to modify the carb or is it somat else
 
×
  • Create New...