I Recently bought and basket case txt 250 year 2000 model for a rebuild project and went straight online to buy a full gasket set and low n behold hardly any about.a few of the usual shops having the odd base gasket in etc.also searching for a good parts shimatic and non of them seem to work.went on gasgas uk shirts website and that wasn't very good.anybody know of a realy good eu/uk old gasgas parts schematic sales website.not gasgas uk it's crap and doesn't open the schematic pictures parts numbers etc thanks.

Edited September 13, 20241 yr by Creepytheclutchmaster

Find the parts book you need online ( this took me less than 5 minutes )  figure out what part numbers you need, then search for each part by number 

This is not the easiest but you should find what you need. Good luck.

12 hours ago, Creepytheclutchmaster said:

I Recently bought and basket case txt 250 year 2000 model for a rebuild project and went straight online to buy a full gasket set and low n behold hardly any about.a few of the usual shops having the odd base gasket in etc.also searching for a good parts shimatic and non of them seem to work.went on gasgas uk shirts website and that wasn't very good.anybody know of a realy good eu/uk old gasgas parts schematic sales website.not gasgas uk it's crap and doesn't open the schematic pictures parts numbers etc thanks.

GasGas is no longer really GasGas  the people who started the company no longer own it and the current owner KTM have no real interest in what went before they took over . Trials bike manufacturers in general usually have a cycle of around 10 years of servicing past models before parts start to go to the no longer available book due  to a lack of demand. Parts books are still available luckily owing to the efforts of www.thehellteam.com a trials specialist  , put Tech support GasGas Info into your search engine and you will get lots of information for most GasGas Trial bikes. 

Edited September 13, 20241 yr by Tr1AL

I have found a parts book online shirts gasgas uk. its crap! it doesn't open the page schematics.thats why the question was does anyone know of any other good working uk parts schematics.

3 hours ago, Creepytheclutchmaster said:

I have found a parts book online shirts gasgas uk. its crap! it doesn't open the page schematics.thats why the question was does anyone know of any other good working uk parts schematics.

Sorry, best I can do is Australian 

https://www.thehellteam.com/technical-support/gas-gas-parts-and-service-manuals

7 hours ago, Creepytheclutchmaster said:

I have found a parts book online shirts gasgas uk. its crap! it doesn't open the page schematics.thats why the question was does anyone know of any other good working uk parts schematics.

It does not need to be a UK parts schematic , find the part you want at thehellteam in the available parts lists and then find the relevant part number then phone John Shirts or any trials specialist shop in the UK and give them the part number and you may get lucky they may just have some old stock tucked away collecting dust or if you cannot find it in the UK look in Spain or France or wherever  like every one else does when they own a bike that has been out of production for 20 years. It is possible to make your own gaskets as gasket material is available to buy in sheet form for cutting with a scalpel and O rings are freely available also .Failing that your only option is to buy a newer bike that has parts that are still available.

If any one is looking for gaskets for a GasGas Contact , TX ,TXT pre PRO motor I just came across  a NOS clutch casing gasket available on ebay UK the item # is 145867271780  the seller is First Racing , Norman Watt Motorcycles 151 Saintfield Rd BT27 6UG.

Edited September 19, 20241 yr by Tr1AL