|
-
neil
like that pic with the water flying
-
made one last night, fitted and adjusted tonight, but too late to ride it
-
thanks for that, i was thinking of cutting the thickness of the pedal down so it doesnt catch the casing where kickstart is
-
Can someone post a picture of what the rear brake pedal should look like. I rode mine last weekend and was struggling to find the rear brake mid section. I think it may not be original
Thanks
Peter
-
-
thanks for that, i will check it tomorrow
-
Neil
i cant beleive you missed gary with his foot down on section 1
good pics all the same, i like the one with the water splashing
peter
-
can anyone help me with the correct way to install the spring that returns the gear selector to mid position correctly
thanks
peter
-
apparently early Gas Gas ones do
just found that out today
-
there is a guy in the uk anglia graphics make the full sticker sets, very good quality
chainguard, make it yourself, i made on for mine and it turned out ok, i also made a seat, not perfect but useable
peter
-
the Gas Gas carb i tried on it had idle 45, main 122, needle jjh 3rd groove from top, slide 3.5
the carb i tried on yamaha had idle 45, main 118, needle jhn 1st groove from top, slide 3.5
starts, runs, ticks over when warm, mixture screw is right in to get it to pick up and even then its slow to respond
any ideas
-
they are re-cycled tyres on mine, just cleaned with armourall tyrefoam
its very close to bultaco front end
i took some better pictures on the grass today
-
thats the last time i try and clean a section AND smile for the camera
sticking to my normal scowl or frown from now on
thanks anyway neil can you email them over so i can scare the kids
-
i think i might struggle to ride it too, need to take another photo without the bright sunlight, the frame looks dark in the last ones
-
good day out, couldn't get a clean on section 1, but didn't do so bad for a twinshock
-
are you buying or selling?
if your buying and going to trial it, why not gat a good used one and spend the extra cash on shocks, exhaust, tyres etc etc
-
looks like the TY is smoking 20 fags a day in one of them
can you send them through please neil
thanks
peter
-
i tried my keihin carbom my 300 Gas Gas on my yamaha and was surprised it ran ok
i bought another carb from ebay, what jets do i need to get it to run well
mains currently 118 idle 35
any ideas
-
finished it off today, some minor tweaks to do, but here it is
-
good idea russell, i only asked the man and he created an Italjet area
as it was when i collected it from russell, with new bars and grips
and as it is now, waiting for the final few spokes to go in and then the tyres on, then ......... do I sell it or ride it ??
-
mine has the repros on it, i dont know if anyone does the squarer ones
-
the frame was powder coated to the nearest colour the powder coater could find
steve goode motocycles is the best stock of spares around, but he only has some parts, i had to make the seat, side stand, chain guard and side panel clips
he is in the process of using my broken spokes to get patterns for all spokes
if you need any advise just shout up on here
-
thanks for that, dont know whether to ride it
-
but what about them wanting a customs letter?
-
got the frame powder coated and have painted engine, exhaust. all other painted parts have been powdercoated, even spokes
just waiting for some replacements from steve goode then we can finish it
it might be too nice to ride?
|
|