rock hopper

Had one had a auto clutch like old hondas 90 cc bikes,not a graet bike

Have a new 200 pro that has a rear tire leak replaced rubber seal,but still have a little leak coming thru on the thd portion of spoke.Do you guy put anything on inside of rim before putting on band???Do not want to keep taking tire and band off not an easy job putting that band on right.

I have a 2005 pro 200 was wondering what oil you use.They say to use autotrak II 400 cc, is this what most are using??

I was wondering If a tank for a 304,335,307 would work on a 348.I saw on the TodoTrials site that thiey are selling tanks for them.

Has anyone come across any info on making a fiberglass gas tank.I was thinking of making one if I can find some info?

That was a 349 tank..

Still trying to find a 1977 348 al gas tank.

http://www.lewisportusa.com The best and the most help

Can or has anyone used tubeless tire with a tube in it on a tube style rim.I was told that it will work fine,and that they hold on to rim better!!!!

I am trying to find a al tank that was used on montesa 348's,I have the USA version that was fiberglass and would like to replace with al tank then use tank cover that Sammy Miller sells.If anyone might know where I can get one let me know.I have found a 349 version ,but will not work with tank cover.

Thanks for info will leave stock!!

Have heard from some old timers That they took the swing arm from the 348 and switch it with a 349 swing arm suppose to make bike handle better by making wheel base from 51.5 to 53.2.Has anyone tryed this or think it would be worth it.Have heard that the 348 had a light front end and this was suppose to help????

What was the stock gearing on a 1977 348 Front & rear Right now I have a 37 tooth in rear,have not check front yet Thanks

What should the center to center distance be for rear shocks on 348.and what was rear travel

I was wondering if any one knows what the differents of these amal carbs are . These carbs are on a 348 and a 349 Montesa. 2626/402-27 2627/402-27 2627/406-27

What is point gap and timing for 349,also do they use the same points and condenser as a 348!

Will the carb and front forks from a 349 work on a 348.

I was told when 348 were used in the Uk that they had to have a non fiber glass tank.If this is true does anyone have any history about this.If so does anyone know of someone who might have one of these old tanks around,or some pictures

Have a 348 montesa 1977 was wondering what bike should be gapped and timed,also bike has a delorto carb on it a phbh26 cs r4173.was wondering if anybody might know or have any recommendtions on how to jet this carb or what it could of come with stock and was it ever used on these bikes thanks

1976 175 what is point gap & timing on this bike. Thanks

1976 175 no spark, how should I start to trace down.Could it be condser!Bike was runnig okay but started to get hard to start.Pulled plug and there is no spark.I checked kill switch and it is okay,not share how to check coil?was going to have look at points next.Any suggestions welcome

When checking oil do you screw it all the way down or do you set on top,I have been doing it with it screwed in,but some of the old bikes use to have you set on top to check level.Do not know which way to do on this bike.