rock hopper

The book says 126 cc, so you add more to help damping?

What wt oil should I use 5,10 ,15 20 ?I have used 10 but forks seem to rebound fast

When was the Godden Majesty frames made and do you know what the head angle, wheel base were.

I was wondering if anyone know if the head angle on the 175 cc frame has the same angle as a stock frame, and is the wheel base the same.

Has anyone done this and does it make much of a change. I have heard that the bore walls get pretty thin? Thanks

I have a 1977 348 and a 1979 349 and the 349 tank fit fine.

I let it warm up for 2 mins and after that it is fine. I do not touch the throttle ether during the warm up. I have had no problems with it.

Has anyone tired the cooling additives that they have to make the cooling system run cooler (redline etc)

Have many changed there 4rt slow throttle to a fast throttle

lewisportusa.com has them look at there web site

I was wondering if there is more info then Sipapu Ski Area for the NM nationals. I want to map quest it and need more info Thanks

Has anybody been using cr5eh-9 plug in there bike. It is a hotter plug.

Thanks for info!!

Where all 200,s forward kick start or all rear,and did they have Fantic motors?

Does the 07 feel different then the 06 with the cam change!and does it start any better?

Are the after market side covers available still ?

I have a 1976 175 and the tank will not work on a 1974 ty250 you could make it work but not easy .The mounting hole is in the wrong place.

I have a stock ty250 with the exception of a Kehin pe 28 mm carburetor,rides like a modern bike!!!!If you want to find out more about jetting for it send me a e-mail

A drill press works great!!!!

Does anyone know where to get a point checker. They use them for telling you when the points open and close. The old manuals show them being used. So they must have some around. Or does someone know how to make one. I have used a battery and light, but would like something better

I have a ty 1974 with a steel tank and it holds 1.25 gallons. I was wondering if the al thanks from the 1976 bike were smaller

I have replaced rubber band on rim .I have made sure band is down,but still cant get it to seal.I was wondering is there some trick to getting these bands to seal.If I pump tire pressure high it holds,but when I decrease pressure it leaks (the rim is on a 2005 200 gas gas)

Have a ty250 yamaha,was wondering the best way to clean rust out of tank

Have 1974 ty250 trying to find air cleaner box cover,rear chain guard

How much fork oil per leg and recommended wt,also what is point gap and piston position before tdc?