Jump to content

rock hopper

Members
 View Profile  See their activity

  • Posts

    96

  • Joined

  • Last visited

 Content Type 

Everything posted by rock hopper
 
 
  1. rock hopper
    I was wondering what the wheel base was on a stock TLR 250 and what the measurement from swing arm pivot to front axle center and also on a TLR 200
  2. rock hopper
    I was wondering when tlr 200 and tlr 250 frames are modified what is the wheel base of these bike. Stock was 1315 (52 in) was wondering after changing fork angle and swing arm changes do you still try to keep that wheel base as the nominal size.
  3. rock hopper
    WD-40 works great
  4. rock hopper
    I have a Tlr 250 and was wondering how much fork oil to put in and what wt
  5. rock hopper
    Was wondering what valve gap adjust for a1986 tlr 250
  6. rock hopper

    Spark plug

    rock hopper posted a topic in Honda

    Was wondering what number NGK plug I should being using for a tlr 250 and plug gap, also what was valve clearance on these engines.
  7. rock hopper
    I was wondering what is the different beteen a TLR 250 and a RTL 250 engine?
  8. rock hopper
    Had problem like that with a mitani clutch when pulled all the way in. Replaced clutch and rattle gone. Seems when they wear down it does that.
  9. rock hopper
  10. rock hopper
    What was the stock gearing on a 1986 tlr 250 front and rear and has anyone have any recommendations for gearing Thanks
  11. rock hopper

    falcon shocks

    rock hopper posted a topic in Yamaha

    Have a ty 175 and was told that the Falcon shocks are very good, any thoughts about these shocks compared to others such as Rockshock
  12. rock hopper
    What is the best rear shock length for a nTY 175 think stock is 12.5 but thought I read here that a longer shock is better Thanks
  13. rock hopper

    Fork position

    rock hopper posted a topic in Yamaha

    How far should forks be placed above the triple clamp on a 175 some have said even and some say 14 mm above??
  14. rock hopper
    I was wondering about mod you did to frame steering, how much did you change it and did you copy it from another frame or do yourself
  15. rock hopper
    Does anyone know what the bearing numbers are for front and rear wheel bearings Thanks
  16. rock hopper
    So was your clutch new when it did this. I guess it does not hurt anything. I thought it might be because plate might be wore a little. I also took apart and could not see anything wrong.
  17. rock hopper
    I do not think this normal I have 3 4rts and this one is only one to do this. It only happens when the clutch lever is pull on the way in.
  18. rock hopper
    When clutch is lever is pulled all the way in get a rattle noise from clutch. Otherwise clutch works fine. The clutch does not slip. Was wondering would it do this if plates are wore. The clutch is a mitani. When bike is cold it does not do it,but after it warms up it starts doing it. Any ideas?????
  19. rock hopper
    Had the samething happen replaced cap and solved the problem
  20. rock hopper
    The bike (2005 4rt) has a Mitani clutch it has started to make a rattle noise when the clutch is fully pulled in otherwise seems to work fine. Has anyone had this problem. Thanks
  21. rock hopper
    I took change mechanism apart and found that it was rusted up pretty good. I cleaned up and greased and now shifts perfect. Thank for all the info
  22. rock hopper
    What is the best position of fork tube height above fork yoke!!! stock or have some found a better position Thanks
  23. rock hopper
    Thanks I will take a part and see what I can find Thanks
  24. rock hopper
    I have a 1976 ty175. Have noticed lately that the bike is hard to get into gear. The lever seems hard to move and does not seem to want to return back (wants to stay in highest position after shifting) any ideas on what might be causing this.
  25. rock hopper
    The book says 126 cc, so you add more to help damping?
 
×
  • Create New...