January 28, 20215 yr Hi, I'm trying to replace the crankseal. Which direction is the crank hexnut removed? 2016,sherco trial 290 I Can't find the answer to this problem in the manual. Please leave a comment. 스포일러 Edited January 28, 20215 yr by jacsal
January 28, 20215 yr Look at the portion of thread that’s sticking through the nut and see how it’s cut and you’ll be able to work it out from there
January 28, 20215 yr Anti clock wise, and you will need a impact wrench. I tried removing one with a long bar no chance if its been done up properly before.
January 28, 20215 yr The easiest way is to use a windy gun - air impact driver. Your local garage would have one and for a few beers would probably wizz it off in seconds.
January 29, 20215 yr Mark the nut and axle relative position first. Than remove nut with a impact gun Change seal Reinstall nut with impact gun untill marks realign again. This way proper tigtening is garanted
January 29, 20215 yr Author 45 minutes ago, cascao said: Mark the nut and axle relative position first. Than remove nut with a impact gun Change seal Reinstall nut with impact gun untill marks realign again. This way proper tigtening is garanted thank U. qood idea
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.