Yamaha

does anyone know what year & model this 175 in the attachment is ?

Hi, as above just wondering how much gear box oil my ty 250 mono will need? I also have a problem with the kick start not catching all the time, is there any way i can fix it cheaply, i heared it has a sort of spring clip to make it catch? as i got the covers off for a clutch rebuild? Also when new clutch is fitted to you have to adjust anything in the enigine or the only ajustment on the handlebars? Thanks, for any replies,

I just received a nice new chain tensioner from tytrials, for a ty80 went to fit it, to find the lug that it fits to under the swinging arm is missing, so any advice appreciated the best way forward, my thoughts are if some kind sole to take pictures of theirs and measurements so l can get something similar welded on. Or as said any other thoughts would be appreciated, to get this fitted. TIA

Hi, could anybody kindly clarifiy what the different positions on the Yamaha TY 125 ignition switch are for? Thanks!

I have a new generic Mukuni VM22 carb I fitted to my TY175, I had the flange tuned to make it a round mount. Please help with jetting. I have tried to match the stock jetting, but I was wondering if anyone has installed a new 'pre-jetted' VM22 carb on their TY? What is the jet sizes you have used? Main, Pilot, needle jet and needle? I'm sure I need to replace the needle but don't want to buy several and they not work. Thanks,

Hello, Sending an open question; Is any one out there interested of producing a batch of ally repackable middle silencers for TYR? Even supply of stock diam or wider replacement pipes are interesting. (Millers is offcource better than old cabonised dented crap.. ) P

Hi just finishing full resting of a 1974 Ty250a, only part I can’t locate is a replacement speedo bracket. Can anyone kindly help with a fix or an unwanted part. thanks david

Hi everybody! can anyone tell me what tyre pressure i should use in my lads ty80? also how can i fin out the year of the bike thanks in advance mozchops

Hey Guy's It's been awhile , but here is my question ...The clutch push lever on on my 84 Ty easily lifts up to the point that I can completely remove it from the left side case ..Is this normal ? I've never noticed this before .. thanks

Does anyone know where I could get the speedo repaired/refurbished? Mine has a broken glass and only operates spasmodically!

Hello hope you can help i cant seem to get the kick start off my pinky the nut seems extremly tight or is it a left hand thread ,i dont want to force it any more or try the left hand option just wondered if there was a knack to removal its the alloy type i dont suppose that makes a difference many thanks John.

After a bit of caveman like spannering need a new carb for 250 mono . Has anyone fitted a carb from a 250 scorpa I have one out of a 2002. Wondering what kind of mods adjustments involved.

Hi, Is it possible to use 1975-1976 LH and RH crankcases from YZ125 with the all the components and covers of TY175?

tank/seat cover and fender on ebay. for 94 TYZ? http://cgi.ebay.com/ebaymotors/ws/eBayISAP...&category=34284 k

Hi I just purchased a new electronic ignition system from Powerdynamo.biz it has just been made available on the market and I purchased the first one they made. It comes with everything from the stator plate to the fly wheel in the kit. I fitted it in around 30 mins, you need to have a TDC tool and a gear puller (the original puller is different), but apart from that it really was VERY simple to fit. You can have it with or without the lighting kit for around

I need a new rear tyre for my recently acquired TY175. Can I use a Michelin X Light with an inner tube in it? Reduced unsprung weight being my objective you see, or am I going to get punctures constantly? ( I don't do much rocky stuff btw) Cheers Bill

Hi, anyone know where to get piston rings for standard bore (68mm) ty250 mono 1985/88. cheers.

Hi all, Will kindly ask those of you who has converted TYR front brake by YZ plate, does std TYR brake cable fit spot on, except for the nipple size to shield lever. It looks like the YZ lever position require a tiny bit longer cable vs TYR std..I do not have any TYR cable. ------------------------------------------------------------------------------- Have tried to order a TYR stem bottom bearing seal from Cane for 3 months now, any suggestion of other suppliers who offers these odd seals, please.. Did order this part ok, for an other rebuild last year... BR,

Yes, it's another TY80 rebuild question. Sorry. I've just got hold of a well beaten up TY80 and would like to knock it into some kind of shape. It isn't going to be concours; just tidy and safe to ride. The first things it'll need are new mudguards. New OEM ones (if a back one could even be sourced) will cost about

Hello Again. I've already asked about the Rayer kit. Now has anybody used the 200 kit upgrade? From Trail and Trial? From a standard 125 how much tinkering would be needed to make this upgrade run smooth? Cheers Squid.