Beta

i have just bought a rev3 the Exhaust is 32cm, where as my freinds is only 29cms they are both 2004 and were both bought as 250's did the 270 have a longer Exhaust than the 250?

I was under the impression the Rev3 2001-2006 pastics are interchangeable, but from what i can work out the front mud gaurds on the 2004 2005 & 2006 are mounted differently to 2001, 2002 & 2003. I WAS going to put 2004 plastics and stickers on my 2003 but i'm guessing i cant do this now?

Is there any kind of manual related to servicing the shock on a 2016 Evo 4t standard model? If not, are there any specifications for oil type, oil volume and gas pressure? I do see the remains of a sticker that probably said Sachs. I softened the fork valving and like the result so would like to soften the shock also.

Last weekend snow fell here in Denver, so i took my 290 apart and greased all of the pivots. While i had the swingarm pivot bolt nut loose i was holding the swingarm at the axle slots, and i noticed that the swingarm bearings had enough play in them that the swingarm would move side to side at the axle slots 1/4". I realize that trials bikes dont usually roll very fast, but this does not seem ok, !/4" is alot of side to side movement. This movement was axial not side to side at the pivot. After tightening the pivot bolt the play dissapeared or i could not repeat the movment due to the friction of the pinch caused by the tightend pivot bolt. Has anyone else noticed this wi…