I have a py 50 that i got cheap for my 5 old son but cant seem to find any parts for it! as far as i know this is a copy of a yam pw50 any one point me in the right direction for spares other than ebay!
THANKS for advice it was hard work pulling bike out of bogs managed to do 2 laps but nearly quit after 1st lap i was that knackered! But that yorkshire grit got me through.
Hi i had the same problem looking for hebo casual tshirts then i found this site1 only thing is that its french but i managed to order a tshirt from them!hebo casual clothing
Hi just to let everyone know that addingham moorside is still open , i was up there this afternoon and i also had a chat with farmer who told me that the complaint was made by someone living lower than moor my guess is caravan site he also told me that he as a local counciller on his side and that moor will be open on wednesdays and weekends! THERE AS BEEN A LOT SAID ON THIS SUBJECT THAT IS TOTAL RUBBISH!
HI everybody any one no who sells hebo casual clothes in the uk! and as a website i have been looking on the official hebo site and i wouldnt mind one of there tshirts!
Right whos got a four stroke beta i wont 1 of them front black mudguards for my 06 rev3 but lampkins are only selling them to four stroke owners! Come on some nice four stroke owner must be able to help!
Bike seems to run right and i dont after clear throttle just noticed on sunday on a long hill climb it seemed to bog down and die and took a few kicks to get it going! I then removed spark plug and it was a nice brown colour so i guess air srew is right!
As i have done all carb mods i was just wondering were everyone as set there needle to and also were there air screw is set to as mine is set to 1 1/4 turns out!
I have been reading that people have been moving needle up or down a notch what difference does this make! and were should it be set. I have done carb drilling mods and float bowl extension and changed jets to 27.5 pilot and main 145!
What a difference with a 145 mainjet and 27.5 pilot jet and float bowl cap rode bike in gale force winds and it felt so much better and revs cleaner set fuel screw to about 1 & 1/4 turns out! removed spark after 2 hours and it is nicely coated brown! not the usuall sooty black colour!
Anyone fitted one these 2 there rev3 carbs and noticed any diference. Just fit 1 to my carb today and also changed main jet from 150 to 145 which was with cap that my brother gave me as a xmas present sourced from lampkins. I have also done carb drilling mods when i got my 06 rev3! Anyone done these mods as well and noticed any real difference and what jets they are running!
Hi there i know for a fact that beta barrels can not be rebored they have to be electroplated then bored to standard size there are 2 sizes of pistons for them depending on grade which is stamped on piston crown!
Hi just to let everyone know that addingham moorside is still open , i was up there this afternoon and i also had a chat with farmer who told me that the complaint was made by someone living lower than moor my guess is caravan site he also told me that he as a local counciller on his side and that moor will be open on wednesdays and weekends! THERE AS BEEN A LOT SAID ON THIS SUBJECT THAT IS TOTAL RUBBISH!
Pw50!
in Yamaha
Posted
I have a py 50 that i got cheap for my 5 old son but cant seem to find any parts for it! as far as i know this is a copy of a yam pw50 any one point me in the right direction for spares other than ebay!