evo boy

Thank you I'm going to ordered one for some Christmas reading

Sorry b40rt its been a long day. Yes that would be great thank you ?

Do you have any pictures of the 2021 model?

Good evening wonder if anyone can give me some advice. I have inherited a b40 off my father he took the clutch apart a few years back now. Could anyone please tell me the way the clutch plates go back in ie friction plate, steel plate, friction plate ect? And what oil and capacity should I use in the clutch/primary chain. Many thanks

I know what you mean it either goes right or can be a pain in the a***. I've always had good results with the cheap air bleeder I got off ebay seems to work well.

Thanks Jimmy I'll check when I rebuild the rear.

Thanks for the reply. Thats what I thought it should as both my bikes disc's sit central. I'll try swoping them round and see what it does. Many thanks

Thanks for the reply. I have ordered a new piston/seal kit as they look pretty dirty so I'll strip clean rebuild and bleed the brake and see if I get it to work

Hello all wonder if you can help. A friend has just picked up a 2016 300rr but the rear brake doesn't work It just bottoms out with no resistance, there is plenty of fluid in there. Can't see any leaks either but the only thing I noticed is the rear caliper seems to be binding but when I undo the rear wheel nut it frees off. The brake disc doesn't seem to run in the middle of the caliper it's more to the inside. I checked the rear caliper and the inner piston seem to be pressed all the way back in and other side out quite a way. Any help would be grateful.

I had a 2017 250 ice hell bought it new for Vertigo UK. I had the spark plugs problem at the start but Vertigo came and sorted it super fast. I then rode it for more than 3 years without any issues and what a great bike it was. All manufacturers sell a bad bike once in a while but from my experience my Vertigo was a top class bike and if you maintain it well it'll be a great bike.

Morning all wonder if you can help. Would anyone know the colour code of the red frame on the 2013 evo factory 300 as I would like to get a touch up? Many thanks

I'll check them thanks for your help.

Just another quick question The front brake seems to be a bit stiff you pull the lever and its like the master cylinder piston is very slow to come back out and the don't have a full lever second time and the brake binds. Does that sound like a master cylinder repair kit needed? Many thanks

Thanks for everyone's help I've put a set of pads in even thos nothing wrong with you old ones and bled the brake seems OK.

I'm going to try bleeding it first thank you for your help.

Thanks for the reply, the pads look good I'll try bleeding it today and see how I get on but I think it could be master cylinder.

Hello all my friends just purchased a 2013 300 evo and the rear brake doesn't seem to be working properly. The foot brake just seems to go all the way down to the sump plate with very little effect. Has anyone had the same problem and a fix? Many thanks

I'll us my wifes toothbrush ?

I see on Facebook a new bike coming does anyone know anymore?

I can't wait to get back to trials but I can't see it happening in the UK anytime soon ? but I hope I'm wrong

I have a 250 and its a great bike but was thinking of a 280 this time and wanted to know if anyone has one and there views.

Thinking of a new Vertigo has anyone tried the new 280?

Hi all I'm after a new chain for my 250 ice hell the only place I seem to find one is Vertigo uk as mine is a 103 link. Does anyone know where else I could get one or any other Ideas Thanks

Hi b40rt sorry if I offended you it wasn't meant to. Thanks for the advice its much appreciated.

Also I've fitted the clutch basket clutch ect back together but the outer part of the basket seems to have in and out movement is this normal? Many thanks