Jump to content

evo boy

Members
  • Posts

    253
  • Joined

  • Last visited

Everything posted by evo boy
 
 
  1. Hello all need some help. I've just bought some S3 Rim tape took them out the pack and there seem to be loads some are like wheel shape and some that seem straight and I don't really know where to start. Please could someone help. Thanks
  2. Hello thanks for that. I only ask because he's been told to run ATF in the gearbox and I thought it was only gasgas that liked that??Thanks
  3. Hello all. My Friend has a 2009 290 Sherco. Which Gear oil should he use in it? What oil fuel mixture should he run? Thanks
  4. Looks tweet telecat top man
  5. Hello Everyone. We finally got the the bottom of our Reving problem, after changing both crank shaft seals she is running a real treat. Thank you so much for all the help.
  6. He's only just got it and seem to start the day after. You can hear the throttle hitting the bottom. How am I going to find this Air leak.
  7. Thank you tony27. Its running a dellorto carb. How would you check the seal or a leak at the manifold? Thanks
  8. Hello all my mate need some help. He has a 2009 290 Sherco. When you start it up all it does is rev its self sky high. Throttle cable fine carbs been removed and clean including jets. We just don't know what's up with it. Hope someone has some ideas. Thanks
  9. evo boy

    Vertigo Launch

    Went to the 1st British round today and saw Dougie Lampkin and the vertigo. He said there hoping the bike will be on sale September time but still no prices. What a bike Looked Great and sounded AMAZING. Just hope the rumours of the prices aren't true.
  10. evo boy

    Launching Soon

    Went to the 1st British round today and saw Dougie Lampkin and the vertigo. He said there hoping the bike will be on sale September time but still no prices. Looked Great and sounded AMAZING.
  11. Thanks telecat that's put my mind at rest. Which plug do you run? Then I'll set mine up the same and see how it feels. Thanks
  12. Hello All. Just a quick bit of advice needed. Has anyone had a rattle sounds engine but goes away when the clutch is pulled?? Is it normal and what spark plug would you recommend running. Thanks
  13. Hello, I know you said to use Dexron oil in the gearbox would anyone recommend or have a link to which it the best to get? Thanks
  14. Thanks Steve for your help I'll try what you said today and let you know how I get on. Thanks
  15. Hello all really need some help. I've bought some heavier springs for Evo. Thought I would start with the rear so I have taken the rear shock off but can't seem to find out how to get the shock apart to change the spring?? And how would I go about changing the front spring one too. Thanks
  16. I only ask because I was told 50/1 and thought that wasn't much. Thanks
  17. Just another Quick question. What fuel fixture and oil would you run? 50/1 and v power or normal unleaded? Thanks
  18. Sounds like Kevin should stick to his Super Trick SWM. He rides that SWM better than most people would ride a modern bike.
  19. Thanks for all your help I'm very grateful. Its going to be a little Different to my Factory Evo but I'm sure after a few adjustment I'll get used to it and love it. Thanks again
  20. Hello all. Wonder if you can help me. I have just Bought a 2014 300 Jotagas after selling my Beta Evo 300. Is there anything you all would recommend me doing as I've been a Beta ride for 15 years and just wanted a change. Thanks
  21. Hello all, Could anyone advise me which 2 stroke oil to use in my 09 290 evo and which spark plug? Thanks evo boy
  22. evo boy

    X Blok Front Brake

    Thanks I will try anything its driving me mad I have a master cylinder service kit coming so with that fitted and your advice I will hopefully get to the bottom of it and get it fixed.... Thanks Evo Boy
  23. I have had the same problem and have ordered a new seal kit from Beta UK... Evo boy
  24. evo boy

    X Blok Front Brake

    Hello jes42 I am having the same problem and getting nowhere just covered in brake fluid. mine came with a bonjo bleed screw/bolt that replaces the normal bolt that goes though hose into the caliper hope thats any helps Thanks Evo Boy
 
×
  • Create New...