ahell

Titanium header

New piston, engine bolts, seals. Ergal swingarm axle from 95>99 Techno (original 1994 : very heavy steel one)

I bought this bike 5 years ago maybe 6. First Owner bike. Used stickers and plastics but this bike was in very good condition. It's time to work on this bike ... one of my dream bike.

Hand made dial mount

First start for this brand new engine. Run well and fan ok. Great day after more than 4 years of silence.

Better with this spring (yellow one is too hard)

Homemade special parts for Sachs or Boge Shock.

New tubes, bushing, seals. This Marzocchi is finished !

New bushings need to be modified but after that, it is perfect. Exit the old rusty tubes.

RAL 1002 from Sprido 2K

Steering bearings, wheels bearings, o-rings, bolts & nuts, fork gaskets and new tubes, 2k spray paint, spokes, exhaust, clutch & throttle cables, handlebar, grips, kickstart axle ...

Blasting ...

Here are some of the parts I've. I also have some new mudguards.

200€ rusty bike

new original piston ! 88.9kg with half tank ... I think 91 kg with a full one and the iron side stand.

140g lighter. thanks to this upper triple clamp. By examining the components of the first-generation of 4RT models, we can see how much Montesa did to offer a 4-stroke with a weight similar to the 2-stroke. Approximately 3.5kg are saved this way. (Frame/wheels/triple clamps, etc.) The handlebars are 5mm further forward and 6mm higher with the 4rt upper triple clamp. So, I swapped the 5" handlebar with the same Renthal 4.5". It's perfect.

I'm working on adapting a Sachs shock absorber. I'm having a rough clevis made, which I'll then machine on a lathe.

72.1kg tank full of gas. Dry weight 70.3 kg