Jump to content

freelander andy

Members
 View Profile  See their activity

  • Posts

    42

  • Joined

  • Last visited

 Content Type 

Everything posted by freelander andy
 
 
  1. freelander andy
    where the best to get tiger cub crankshaft big end changed well can do it
  2. freelander andy
    put eclectic drill in a vice sick valve in chuck use henry cloth or sharp screwdriver like you wood or metal machine wood shinny like new allways done it cars tractors
  3. freelander andy
    yes frame weld not tidy so change all engine bolts and stress bolts this one had a small fire fuel spiling out of the carb so thats good not all bad then thank you for reply
  4. freelander andy
    hi just got a chitsuma gy 200 bike been lade up in shed it had a small fire carb was pooring out fuel easy fix whats any problems' with them cheap chinise bike are any good
  5. freelander andy
    hey thank you I sign up to facebook very good and give thank you to you I have a guy had tank for sale so got clean inside just needs painting
  6. freelander andy
    1978 dt 125 is the petrol tank the same size as dt 100 one looks same shape
  7. freelander andy
    I just got old dt125 off flebay as far I know has no nova its been for sale on ebay on and off is it easy to apply hmc for
  8. freelander andy
    tiger cub gearbox mainshaft how much side play should I need I have ordered a 4tho over size shim I know need a small amount side play . I cut my access plate out
  9. freelander andy
    I had the with my honda xl I had hell of a job the spacer would not move to one side so I used my cheap blind bush puller it done the job if you not got them you could wield a lump then you get a long punch knock it from the other side that would been my next move if the bush puller did not work
  10. freelander andy
    no don't need there is a small breather hole at the front inside for the engine the top bush leak a bit when the engine is not running just leak back in to the engine . but if your using it for trials going to streams this needs to be changed
  11. freelander andy
    I have used chain lube spay primary chain make sure the inner clutch bearing has bit grease on that do on my bsa b40 c15 use rubber instant gasket with your paper gasket let it go off over night then put drop of ATF in see if leaks out
  12. freelander andy
    hi can you send a pick of 3rd with groove cut into the dogs ring see I can get a new bush for the first gear kickstart there not a lot of youtube proper rebuilds on cubs and making doing the ness mods making them better
  13. freelander andy
    my kickstart gear is sloppy anything to do why its jumping in 3rd I have good set of std gears good job pinch kickstart gear then try get new bush ring Greystone or Meriden who best
  14. freelander andy
    its says 3rd wide mainshaft 25 layshaft 20 .1st and 2nd standard I have a set of trials gear in my hand yes right to the tr20 I wonder what is wrong with my cub none matching gears it slips and jumps like slipping chain I have not check that
  15. freelander andy
    the 4th is 29 sleeve gear layshaft is16 .bob upb he supplies lower 2nd gears that used on standard 4th 28th sleeve gear if you look at upb web site I don't know primary size gear somebody else may reply I been looking in mike estall tiger cub bible my front gearbox spocket is 16 I don't know back its bit high gear if go 15 14 it be right not good on road I have no access plate how can cut it out in suite or best strip down done on a mill
  16. freelander andy
    no access plate I have removed engine the engine is tired it was a barn find cub rusty I clean it up drain oil full sludge fitted world electronic ignition away she went and smoked done road trial but I have a recon engine doing had crank done oil pump conversion I have top hat bush for shaft od seem bigger inside needs reaming I can give outer cover to somebody can that
  17. freelander andy
    my problem is I have no access plate I can see yes knock plug out I could cut the old bush and fold old bush put new one in and try shaft see fits if not ream with adjustable reamer use prybar get plug back in I have a new access plate can that be done with my gearbox in bits with a mill or a home made way using sleeve gear as centre mount with cutter
  18. freelander andy
    hi went to look at my cub rotor deff spacer behind next sprocket
  19. freelander andy
    my side case is off on my cub I think the spacer fits behind the rotor gives clearance for the chain I look at mine in the morning I think I come to this when I fitted mine I will warn you be carefull of the wiring don't snag on the chain if slack bloke down road drill hole in the outer cover had the wire coming at top if removing cover often i mite do the same to mine
  20. freelander andy
    I found strait reamer wait till come I did not want knock the core plug out .is like car dish shape core plug if bang centre it expands I have set of cases with it missing may be its the only way i going to it I found the 29th trial 4th sleeve gear I am building another engine some bits had been done got the small drain hole side case welded and drain pug put in upb has a new side case with clutch arm in now think it was 250 270 like that
  21. freelander andy
    my old tiger cub snatching in 3rd gear rest all find so stripped gearbox down found the inner layshaft bush worn so I ordered one I would need ream new bush any body know size of reamer need cant used adjustable as doing in insult I am getting blind bush puller from ebay to old one out
  22. freelander andy
    i used bemto it was 100 pound full comp with no claims protection just tax it the msm just went round and round with it a lot insurance wont cover if you enter a road trial with number on as i am not
  23. freelander andy
    which is the best and good price on off road bike insurance
  24. freelander andy
    well been thinking about that just going leak oil out so I better get one of them bushes have you got the part number I will get one upb thank brucey
  25. freelander andy
    yes I found out 2 type side gearbox cam case I using distributor cam in mine points in the side then have plane cover on end blank the small hole to adjust the distributor I had new big end and and long stroke oil pump conversion merriden done it just put all together now
 
×
  • Create New...