| |
-
Many Thanks for all the advice on how to remove a tyre from the rim, some sound advice and some best left be,
Now that my new tyre is back on the wheel, How do I get the bead baxck on the rim so I can blow it up, air pressure alone does not work, is there some trick way,
I once saw Clarkson on top gear put Lighter fluid in a deflated tyre then throw a match at it the explosion nicely popped the tyre back onto the rim and inflated it too, I wont be trying that though, well not just yet.
Cheers,
Vaughan.
-
Hi,
Can anyone explain a simple way to remove my rear Tubeless tyre from the rim, or do I need a special tool or take the tyre to a garage.
Cheers,
Frankie.
-
Cheers,
I will give them a call.
Vaughan.
-
Hi, Im looking for a supplier of the two small oil seals located right at the bottom of the forks on my Ossa 350 1977.
They are 16mm diameter, hole size 8mm and 2mm thickness.
Im located in the North East of the UK,
Anyone can help ?
Vaughan.
-
Hi Scotty, I got a seat cover from Dave, Superb, it is the Ally tank and the Stickers went on fine after a little heat to soften them, Thanks for the other advice, Vaughan.
-
Hi Everyone,
My Son Scott and Myself are restoring a 77 OSSA 350 Trials bike, to record the Project we have put together a small Web site, ( OSSA-restoration.piczo.com ).
We will be posting Info and pictures of the progress, please feel free to have a look,
This is our first Restoration Project so anyone with tips, advice or contacts feel free to comment.
Cheers,
Vaughan & Scott Thompson, Durham, UK.
-
Thanks, Everyone for the help and advice it is much appreciated.
Vaughan.
-
Can anyone help me to date my TY 250 and any other info as to its Origin,
Is the White frame original.
I have included a couple of photos if this helps.
The Frame number is 498-801910
Cheers,
Vaughan.
-
Hi There,
How can I tell the model and age of my TY 250 Twinshock.
Cheers,
Vaughan.
-
Hi There,
Can anyone point me in the direction of a supplier of Spokes for the rear wheel of my 1978 TR 350 OSSA,
I live in the north East of England.
Cheers,
Vaughan.
-
Hi All,
Can anyone advise what type of paint to use on the front pipe of my Ossa 350 Trials 1977,
I would like to get it to the original semi gloss black if possible.
Cheers,
Vaughan, Durham, UK.
-
Hi ,
I was at the Consett Trial at Rogerly Quarry too, just watching not riding, at least you had a go Consett trials Easy & Clubman, are not usually that difficult although the last few Clubman coarses have been reported to be more difficult.
If you live in the North East go along to Warden Law or Castleside Quarry where you can get some practice in, Good luck.
-
Hi, Can anyone advise me as to what kind of Paint to recoat the front pipe of my OSSA, I would like to get it back to the original finish of a simi gloss black.
Thanks,
Vaughan, Durham, England.
-
Hi, Can anyone advise how to get a big dent out of my Ossa petrol tank, the bike fell against a wall and has a 7" dent along the length, apart from that the tank is unmarked and still has original paint.
The tank is an Aluminium type, Im located in the UK Co Durham.
Cheers,
Vaughan.
-
Cheers, Woody, Picture is the bike I have and Mats site is spot on too, very friendly Guy, going to send me the Manual, Thanks a lot, Vaughan.
-
Hi 2rargone,
Thanks for the reply, yes it is a green one and if your right I have the right carb, I will check out the site for the seat.
Much appreciated,
Vaughan.
-
Hi, I have a 1977 Ossa 350 trials bike I am about to restore, does anyone have a wokshop manual I could copy, I think my bike is pretty much original but im not sure about the BING carb, also any contacts for Seat re-covering and Tank repair (got a dent in it). any other info, useful web sites etc would also be appreciated.
Regards,
Vaughan.
|
|
