davet

http://www.gasgasmotos.es/manuales/index.htm check out manual

http://www.ebay.co.uk/itm/370633977538?var=640032763642&ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2648 try these cycling jacket slightly longer sleeves which benefit the cyclist and also you..

http://www.trialsuk.co.uk/categories/wulf-neoprene-gloves these are the gloves for cold weather...velcro wrist fastened and clarino palm..

http://www.sherco.com/EN/service_manuals.html Take a look on this site ...gud luck

Look on the cycling web-sites http://www.wiggle.co.uk/altura-night-vision-waterproof-jacket/ theres plenty of choice.....some good gloves aswell

Bikesure £128 for my 2010 gassser 300, with none of there extra's.

Cheers Blocky which is the idle jet and can it be taken out, without dismantling carb ?

When on tick over nearly cuts out ,i have to rev to stop engine stalling. But when giving it some power the engine does not miss a beat, but as soon as i shut off the engine sounds as though its searcing for more fuel. Never worked on this type of carburettor before, there is only one screw which i belive to be the air screw.The carb on other bike had fuel & air screw. Can anyone give me some guidance on what to do or what to check , Thanks

Cheers for that, but on you tube gas gas fork seals it says not for Marzocchi forks so are these different inside or components ?

As the title says mine have bust on my 2010 300 raga fitted with Marzocchi forks, can anyone give me any tips , or the order in which to perform said task.....Can the action be performed in garage / shed or is it a visit to local trials shop ? with my wallet.. Just been quoted £70 for the pair if i take the forks in not the bike.

Na then wots this very proficient....id like to say Moderate..Ha Ha... Welcome Stainy Al cy thee soon Dave.

Sounds like ive bought a monster !!! but when i ride it from now on seems the sun is always going to shine on me Ha Ha.. Thanks for all your replys

Eh op on my raga 300 there is two red switches on top of the radiator, I have been told it is a mapping switch for the engine. Can anybody explain what it does and how to use... Cheers

Thanks for replys,like you all say half full check glass window,run till engine hot then re-check and any amount from 350 to 550ml it seems been told to use light gear oil, But you all say ATF Dextron . Where to buy and cheapest place please.Also was told to use putoline fully synthetic oil at 65ml to 5 litre of petrol dont know what ratio thats is.What benifit will Shell V Power oil give me ?

Cheers Rich for reply, what other mistakes may i need to know ?

Having recently bought 300 raga , i would like to change filters and oil.....Question Which oil ? suits my bike. Secondly there is a spy glass but how much reccomended oil. And if you have any other info that might help me along the way, it will be gratefully received.. Thanks Dave

Sure helps Trev ,Its good to know im not daft...Thanks .

This may seem a daft question but does one have to buy bigger grips for fatbars ? rather than the normal hebo grips .

Thanks for all your replys, but just you know the unbeliveable has happened my bike has been recovered..... A friend of a friend phoned me to say my bike was in his back yard, he saw a statement id put on facebook,and made a few enquires with the local thieves and located my bike, a few words with them and let him have my bike... Got there names just got to arrange a little lift into the countryside where one can stumble and break a wrist ever so easily and this time of year is the wrong time to be out at night in your birthday suit ... Ha Ha revenge is sweet.

Got woke up this morning at 2-20am alarm on garage going off ,dressed as quickly possible and to the garage in record time to find garage door bent open from bottom,the door handle and padlock to bottom right corner entact....But my Gas Gas 280 txt ltd edition 03 model GONE... Bast/ds Stolen from Doncaster area South Yorks. The bike was red plastics in above average condition . V.I.N /chassis/frame no VTR*GG*2801 ...........full number available If anyone out there heres of any info please leave link on here Please.... Thanks for your time. Cheers

Thanks for that i will tell my mate to check frame / engine for the model & sprocket sizes cheers

With over 100 visits and no reply..Have i got the model wrong ? it is a 1978 Bultaco 250cc blue colour. surely there is someone out there with same bike, what size sprockets ? Is it alright to fit 12 tooth front 42 tooth rear same as modern bikes ?

Hi to you all my mate has bought a Bultaco 159 sherpa 1978, and would like to know what size front & rear spockets to fit for trials ? any info greatly received

Just check the axle spacers may be slightly different,alternate them and hopefully wheel centred