smallboy

Hi all I want to remove the front pipe on my EVO 250,the two fixing bolts seem blocked by the frame,is ther a easy way of getting at them? Regards

Hi all I want to buy a bike for my two children one 13 and the other 15,which is the best bike to buy to start them riding trials? Cheers

Missed it,any idea if there is a re run?

Hi All standard fitment,any ideas?

Hi all I cannot seem to tighten the lever clamps on my BETA EVO,fully tightened still move,any ideas? Regards

Hi all I need to buy a new chain for my BETA EVO,i have changed the front sprocket up a tooth,to a 12T.What would the ideal length be as the oringinal is a tad short. Regards

Hi Anybody got the results for the Matthews Cup at Bellingdon on the 22nd of may 2011? Cheers

Hi all Just stripped the headstock on my EVO,on reassembling,i notice the headstock collar that tightens the bearing cover down has a circular ridge on one side,should the ridget face down or up towards the handlebar clamp? Cheers

Thanks for your help.

Help please Just removed the R/H fork leg,to change oil,removed damper unit,was pumping it to remove oil,a very slim metal tube came out of the damper followed by a small silver bung/plug? i have checked beta service parts list,nothing shows these parts,help please??? Cheers

Hi all I am interested in changing my standerd footrests on my EVO,looking for a wider footrest for comfort,cannot go to raptors but good value steel ones would be ideal,any info please? Cheers

Thats me not going then..................

Thats a great idea,any picures,info on drill size/is the grease nipple self tapping?

Hi all I had a hard fall with the bike going down a 12ft drop,flipping over several times.I rode it today foe the first time to notice a clonking sound when i push the forks up and let them rebound,with the front brake applied,if the the brake is off there is no clonk,forks seem fast to rebound. I have checked handlebars/top yoke,fork legs,triple clamps and front brake disc caliper,all are tight. Any ideas? Cheers David

Hi all I want to make my 1st gear longer(is that the right description?) as it revs out quickly,on my EVO 250 2010. Any ideas on sprocket sizes,and what difference it will make? Regards

I bought HEBO boots,had the same problem,the supplier and the importer were not interested in any help at all..............total rubbish,a waste of

Hi all I keep having the same problem with my brakes on my evo.Everytime i wash my bike,leave it for a week,when i ride it the brakes have lost any bite,they squeal and groan but hardly stop,if i ride it with the brakes on,the front comes back about 75%,but the rear just rub with no real stopping power,i get them hot and squirt water on the disc,s when hot which helps but not cure.The only time i get good brakes is when i fit new pads.I do wash my bike with a pressure washer and finish it off with cleanng spray (muc off).Are they staying wet,should being damp effect to this degree? Any ideas please? Cheers David

Hi guys 227 views and no replies,very strange,this forum is normally brimming over with advice. Should i ask the question in a different way? Cheers

Found it,shock on backwards........................

Hi all Can somebody advise me ,what the two adjusters are on top of my EVO fork legs,and what do they adjust? Cheers

Hi all Which is the damping adjuster on the rear shock? Cheers

Hi all New to this,so i would like to ask the following: How do you adjust the sag on my EVO 2010 250,i have read all the threads but still am struggling,i understand the measurement,but am struggling with the rest. How do i adjust the rebound on my front forks? How do i adjust the dammping on my front forks? How do i adjust the rebound on my rear shock? How do i adjust the damping on my rear shock? How do i adjust the sag om my rear shock? How do i adjust the sag on my front forks? Sorry for the very basic questions,but i know if i ask you guys i will get the awnsers,please awnser in basic terms. Cheers