| |
-
Hi there
Can anyone tell me if the bmca are having a trial on sunday?
The web site as dates from last year.
Look forward from hearing from you
wayne
-
Hi there
Does anyone know if the dates for this years trials have been released yet,as they normaly start around now.
regards
wayne
-
Hi there
It will be the o ring at the top of the barrel
remove the old one and replace cost only a few pence
good look
wayne
-
Hi there
Ive got a bsa bantam bushman with heavy duty forks and need help.
I need infomation on the amount of oil i need and the type to us.
kind regards
wayne
-
Hi there
Can anyone help me? Ive just bought a bantam fitted with a set of hd forks.
The springs are fitted on the outside.
What i need to know ,there seems to be no springs inside the forks,is this right?
Also where can i find a exploded view of this
kind regards
wayne
-
Hi there
look up redditch motorclycles,and ask chris if he can help
regards
wayne
-
Hi Jack
Ive the same bike and have had the same problem. the fault is a worn gear selector.
You will need to remove the clutch casing off and you can see a flat plate that hooks onto the gear selector pins.
Gas gas do have thease parts or you can reshape the plate
Hope this helps
wayne
-
Hi there
gas gas uk have just had a delivery of 40 kickstarts, also try bvm
hope this helps
-
Hi There
Can anybody help. I have broken my kickstart shaft on my JT35 and now need to convert it from a 16 mm to a 18 mm. Has anyone done this conversion - if so all information would be much appreciated.
Information required:
1. The dia of the hole I need to enlarge in the outer casing to accept the new seal and bush
2. The item numbers for the new seal and the new shaft bush
Finally will any kickstart arm now fit the 18 mm spline shaft.
Thank in advance
Wayne
-
Hi Jon
Thanks again for your help,you have put my mind at rest as I thought my hubs where worn.
Ive got a biger problem broke my kickstart shaft to day.
thanks again
wayne
-
Hi there
Can anyone heip me iam new to trials
Both my brake dics are loose and move backwards and forwards,but the holding bolts are tight.
Is this right?
regards
wayne
-
Emailed gas gas over a week ago, no reply yet. Got more help from bvm
I know my bike is old,but i still need parts.
-
Hi there
Removed clutch and found selector claws worn on one side.
If i move the gear selector it will go into all gears.
Next can i weld this up or do i need a new one.
can i replace it without spliting the engine? ie pull out shaft and no bits in side fall out?
regards
wayne
-
Thanks Jon
Will strip down first thing tomorrow and have a look.
big thanks
wayne
-
Hi there
Just been riding my 1995 jt 350 when i selected first the leaver went down and a grinding sound came from the gearbox.
I have all other gears but first and it still rides with full power.
Any iders on wots wrong?
help needed
regards
wayne
-
Hi there
Ive got a 1995 jtr that when i start up will run ok for a short time, then steam and coolent will come out of the over flow.
IF i rev up, then back off more fluids come out. The impler is turning and the fan is also working.
could this be a gasket
can anyone help ?
regards
wayne
-
Hi there
Can anyone help,my jtr 350 1995 kick start keeps hitting my foot peg and i wounder if there is a stop some where to stop this happing.
if you can shed some light on this please let me know.
Also can any other kick start fit this bike?
regards
wayne
-
Hi there
I have a 1995 contact 350. which the start kick hits the foot peg?
Is this common or have i got a problem?
Is there a stop or adjuster, my kick arm is slighty bent.
If you can help, please let me know
regards
wayne
-
Hi there
I would like some info on idle speed? when riding at low speed should you need throtle or should you just run on tick over?
can anyone help
wayne
-
Hi there
You will need 650cc of gear oil,I use atf and it seams fine.
Look up gasgas usa site this is great,if you need more info email jon on that site.
hope this helps
regards
wayne 350 jt
-
Hi there
I use powder coat on all my bikes.wears well and no chips.
I use redditch powder coating(paul or dave).
they have riden trials.
regards
wayne
-
Thanks woody
Its hard to find out about trials, have you rode there?
regards
wayne
-
Hi there jam
Is it open to adults who are starting out in trials?
regards
wayne
-
Hi there
As anyone rode cleeton court? iam looking to ride my first trial there and wonder if it is 100% ridable?
Any help will be great.
regards
wayne
-
Hi there
I have a jtr350 and got in contact with gas gas uk and they sent me a photo copy of a parts list , at a cost of
|
|
