nelly1

im at a trial on sunday so im going to try it with a bit more oil in it i always use v power it is 70:1 at the mo putoline trials strawberry stuff maybe richen it up a bit 1.5 turns out is normal if i remember right ?

happy new year ben keep the vids coming mate

id swop the water pump seal if you have one it is an easy job and then one less thing to worry about if there was enough moisture to leave a drop on the plug can you try and kick it over and see what flies out of it tissue over plug hole and asniff should tell you if its water or fuel

thanks for that and thanks for everyones help

thats interesting how many sizes are there

thanks guys il give it a go happy new year

its deffinately got a top end rattle so it has to be done anyway

about 12 weeks ago when i first heard it and it doesnt happen all the time and i dont ride it hard

can somebody give me some advice my evo 250 could do with a top end re build i have a little end rattle nothing major but its there and sometimes after high revs a fairly quiet clack noise (only way i can describe it ) my question is would you change the piston or just the rings the gudgeon pin as well as the little end or not head gasket for sure but ive been told not to order a base gasket money is an issue so i dont want to waste any the bike is an 09 i have only had it about 6 months it has been well used but very well cared for by me and the previous owner thanks neil

you are so lucky to have an area like that to practice i cant tell you how jealous i am

good luck and have fun mate

i ride at frodsham it is a fun club with some good venues as said above trial on on the 6th il be there with at least 1 other you are welcome to join us if you dont know anybody else there

im 14 stone and with the uprated rear it feels great your welcome to bounce on my rear end anytime (oh er ) cant go out to play for a bit in work and buying a ty 80 for katie so she will need some practice first

hi mate long time no see i have the uprated rear spring on mine and it feels great unfortunately it was on since i got it so i cant compare with original what happened to the gasser ?

thankyou matey hearing it from somebody else helps give you confidence

anybody done one ?

i think the same are there and splits or cracks in the inlet manifold

how to change the seal please

anybody done a wp seal on an evo 250 i need advice before i attack it thanks

very nice ben happy christmas

i want to be able to do this

happy christmas all

if only i could do a small fraction of that id be a happy man

that was very good happy christmas

is it just a hole worn in the side of it if so i repaired mine by riveting a aluminium plate over the hole it worked perfectly and cost almost nothing