steam

How much oil and what grade for 2008 Rev 3 2t forks please

do you have to remove the flywheel

Any reason why I cant use Avgas in my Premix for a 2008 rev3 2t? I am trying to stop what seems like pinking on a light throttle.

on a 2008 rev 3 i cannot stop the rubber grommet on the petrol tank cover panel from coming out. any ideas please?

what affect does removing the flywheel weight have on a 2008 rev 3. is it easier to ride ?

Has anybody tried Boyesen Reeds on a Rev3? Any noticeable performance?

I am having brain fade. I have regreased the steering column bearings. Where does the shim go and which way up do i fit the castellated nut(one side has a shoulder) on the stem ,thanks

Do you remove the flywheel as well before you spray WD40

250 two stroke

Has anyone improved the performance of a 2008 Rev 3 (keihin carb) by changing the standard pilot,48, and main jet,125 as mine is running rich at low revs. Needle clip is in middle posn

If I touch them, i repeat,touch, in a muddy secyion the front brake locks with disastrous consequences. on the tarmac they compress the forks very quickly. I have the preload adjuster screwed half way in.

The front brake on my Rev 3 is grabbing. Any ideas how to stop it?

[Thanks for info, but trick Bits no longer sell springs

Are uprated springs available for a Rev 3?

Dont knock it till you've tried it !!

] ) Is an Evo spring the same as a 2008 Rev3?]

What maximum weight of rider are the standard front and rear springs suitable for. I am 15 stone(NAKED)

Blast, wish I had not been too lazy to go now. By the way what does IMO mean and where can i see results?

Did their Trial at Stroud run yesterday?

I would like one as well.

Are the engine characteristics different?

What,if any, are the advantages or disadvantages of a 250 EVO over a 2008 ReV 3(Keihin model)

great camera enjoyed it. was going ,now wish i had

are you from ledbury bo drinker?