Jump to content

azzy

Members
  • Posts

    18
  • Joined

  • Last visited

Contact Methods

  • Website URL
    http://azzy@manx.net
  • ICQ
    0
Contact Information
 
   
  1. I have used Alloy Betors Alloy Falcons and currently use Rock shocks on my Majesty. All of them are very good and much better than anything that was available in the day.
  2. Yes Penno350. It sits below the chain and has a slipper that pushes the chain up and an adjuster bolt. If your using it for trials leave more slack than reccomended it makes the take up much smoother.
  3. Hi. I have had this problem on the three Betas I have had including my new 250 Evo.If after riding around with the clutch pulled in for a few minutes does not free it. You need to drain the gear box oil and remove the clutch plates. Clean them up then lightly sand them and re fit. Put in 425ml of ATF then try it. Please dont let this put you off the bike as they are brilliant when the clutch is sorted.
  4. azzy

    Ty250 Engine Knock

    Hi Mike. Before you start any engine work try adjusting the carb as it sounds like its running lean to me. Cheers Azzy
  5. Hi you are right numbers are limited to 50 twinshocks. I suggest you get your mates entries, and send them in together. Keep checking the Manx Trials Club Website. They will be out late Jan. Entry is usually full within two weeks.! It is well worth the effort though. Feed back from riders is the best twinshock trial they have ridden. Cheers Paul ansermoz
  6. azzy

    Beta Rev3 Carb Mods

    My 06 Rev 3 runs very rich and doesnt rev out properly. Any mods you have tried successfully??
  7. Hi You are right it is a 200. The FM350 identifies it as a 200. Ring Bill Pye @ Frankfield garage. He will date the bike for you. Cheers Azz
  8. HI i bought my son a 2007 250 sherco he absolutely loves it ! It has brought his riding on and his confidence no end. I have ridden it and it does feel better than his 250 Beta we traded in. more go and easier to flick and hop around (his words not mine.) If you fancy one just buy it I don't think anyone makes a bad bike these days. cheers Azz
  9. Now i am confused. just checked in my 4rt 07 manual it says to check oil level without screwing in the dip stick???do sandifords mechanics recommend something else??
  10. azzy

    4rt 2007

    Yea. i ordered mine before christmas took over a month and they told me they had stock!! worth the wait though. I have fitted a mitani full system runs and sounds terrific ! a little louder than normal but a much sweeter sound. No plug fouling and starts easy. I havent stalled it yet either. Done two trials on it and had two second places.
  11. azzy

    Dads Got A 4rt

    I had an 05 4rt had 07 for two weeks I thought the brakes were weak at first but they are much improved now. My son has an 07 250 sherco he says my brakes are better than his!! I run a 46 tooth rear as the four stroke pulls gears for ever but trying out sprockets is the best way.
  12. azzy

    4rt Spare Wheel

    Hi Moulder I picked up my new 4rt last week after I enjoyed a few trials on an 05 model. first impressions were the clutch is much better and the throttle response is much smoother off the bottom. Don't judge the bike after one or two rides. They seem to take a lot of running in. Mine has just started idling smoothly and starting easily after 5 hours use!! Any one else find if you stall it it's hard to start. But if you gently ease the kick start over with the throttle open a few times then start as normal it goes first kick. Am thinking of a mitani full exhaust system. any one tried one?
  13. azzy

    Spares

    Hi Ashbabble i find Talon a good source for chains and sprockets also spokes and such. As for a manual for your Beta i dont think one was produced. The only trials bike I got a manual with was my 05 Montesa 4 rt. and that was about an inch thick!!
  14. azzy

    4rt 2007

    Hi I don't think i will be getting much sleep tonight. I am collecting my 2007 4rt tomorrow!! wonder if the shop will be open at dawn?
  15. azzy

    Falcon Shocks

    Hi I have a pair of these fitted to my Seeley Honda. The valve on the top is not for air it is for nitrogen! The gas is put in when they are manufactured. I know this as I phoned the manufacturers with the same question. You can contact them on:01929 554545 hope I have been of some help Azzy
×
  • Create New...