nicbrrghs

Cheers will look up your blog as soon as internet becomes available. Thanks in advance.

Hi, I am due to be working at Spruce Meadows near Calgary next week for about seven days. I was wondering if there is anything going on locally that i could watch whilst here.

Sorry forgot to mention I am just short of 6 ft and normally ride arev3

Hi could do with getting some bars with a slight rise i feel a bit hunched over on the bike. Which ones are recommended also need a clutch cable with mid cable adjusters on unlike my venhill. I have sammy miller foot rests fitted and standard length shockers. thanks in advance

Does anyone know of a practice area close to camberley pls.

Could anyone advise which hanger this needs? Mine is missing so chain is slack and cant fit a chain tensioner. Any help appreciated.

absolutely brilliant good luck and enjoy

sounds like the airline might have dislodged some muck and blocked a jet try again with another carb clean. physically remove the jets and clean off seperately then do the body of the carb. Hope this helps

Hi currently running 50 rear and 13 front and would like it to be more section friendly. I never use it on roads or trails. All advice greatfully recieved.

Yep no worries its ATF same thing give it a google and it will confirm

Hi, I have a standard Ty175 but want to 'tune' it a bit and was considering boyesen reeds. What difference do these make and are they worthwhile. I have a miller tailpipe to be fitted but will wait until after reeds if thats the best way.

Hi does anyone know of an alternative kickstart for ty175. Mine is broken and I found a post on here about rd350lc kickstarts fitting, I could do with more info please on the year of the rd's. Any help or suggestions welcome

Hi, Have a search on here and do the carb mods( Float level, T piece hoses etc) these make a huge difference also the float bowl extension, brilliant bit of kit.

http://www.sammymillerproducts.co.uk/ Try the above he makes some great bits for twinshock and/or older bikes and produces his own wide chromed footrests. Hope this helps Nick

http://www.sammymillerproducts.co.uk/ Try the above he makes some great bits for twinshock and/or older bikes and produces his own wide chromed footrests. Hope this helps Nick

new to this sport and would like a few pointers on bike setup! any help appreciated

Thanks for your help. Should have mentioned its for my ty175 Hirsts look like they have them in stock. Thanks again.

cheers wayne I am living in the barracks at Blandford and dont know the area that well,any help is appreciated

I am looking for standard sized rings and am struggling to find them apart from with new piston kits. Any ideas appreciated

Try on ebay just noticed one on there put beta in as search

Yep thats right where the oil pipes come out some body said there is a yamaha part that fits perfectly for a couple of pounds.

Hi, I'm sure someone on here posted details of a replacement bung for when the auto lube cables have been removed on my ty 175. Unfortunately I have searched and cannot find the details. help!!!

Thanks for all the advice, the ty is now running well and is getting well used.

Hi, just back from trying out the 175 good fun but seems to bog down at the sign of a hill, wondered if it could be the float height unless someone has a better idea. Are the fork seals a nightmare to do?

Thanks for the advice,I will go and 'play' tommorow and try the forks at different heights also the needle in the carb is set one from the top. Do most people run them on the 4th from top as per the manual.