|
-
Stolen yesterday whist in the Lichfield area. The bike is a standard 2012 with 2 kill switch buttons one to help with the start, yellow rear shock spring and Ossa factory racing rime tape. chassis number 0000185. mint condition only 2 mth old and done nothing, Please every one keep an eye out and watch out what your buying. if anyone has any information please phone the police on 101 and pass any information on. Or ring myself on 07791161427
Well im one gutted, Ex Ossa owner......
Thanks All
-
I noticed over the last few rides out that there seams to be a tapping voice coming from the engine, some were near the cylinder head, any one any ideas or suggestions please.. Thanks
-
Thanks, the spark appears on the engine near were the rubber manifold cornets to the engin, I've checked all the wiring and earths,, I'll changed the spark plug , I'll let you know,, thanks
-
Sherco 2011 290
When the bike is started it runs ok on idle, but when applying power the bike backfires and there seems to be a spark at the back of the engine manifold, then cuts out... I've checked the wires and there docent seam to be a short anywhere...
Any ideas please its got me beat..
Thanks
Sean
-
I have a 4 stroke beta evo, the clutch as gone as hard as a rock, I took the clutch cover off and the clutch plate, dose not move.
I tried bleeding the system but it ends up the same ahhhh, any thought/ ideas would be appreciated, Thank
-
-
I have a issue with my rear wheel, all the spokes are leaking, I have bought 2 rim tapes now but they don't seem to fit properly. Do beta wheels need a special rim tape????
Any advice would be good, its a fantastic weekend and i cannot ride..
Thanks
-
Was thinking of a trip to Scotland to watch the Six day this year, is it allowed for spectators to take there bikes to go and watch some of the remote sections or is this not allowed.
If this is allowed were are the best places to go and watch, please advise
Thanks
-
Thanks for all your input, I think the.............BETA 300
-
I currently own a 2010 Beta 300 4 stroke and may be looking for a change the beta is a fantastic bike and works fine.... However the Montesa 4rt looks also a very good bike, expensive and may be a little dated but I believe they are very reliable and cheap to run
Thoughts please Beta or 4RT
Thanks
-
I got a some quotes yesterday on go-compair website I managed to get some good prices at around
-
Thanks i will give it a go..
-
good point, i have a Evo 4 stroke, thanks
-
Could any one tell me how the mixture screw should be set in the carb, i cleaned the carb and did not make a note of the mixture screw settings OPPs.. thanks
-
Lakes 2 Day Entry List Available
www.lakes2daytrial.com
-
www.lakes2daytrial.com
TRY HERE
-
We are currently developing a web site for the lake 2 day which will have all the relevant information on. The site will be up and running within the next week or so.
I will post the site address on trials central when ready.
Cheers
-
I have heard that Scorpa 4 stroke are a good option due to the amount of grunt they have, also the reliability is topps
that would be my recommendation. I also noted Birketts got a second hand one in his shop if tat helps. Good look
-
I was there when he fell, awful to see, Im amazed he competed today STAR MAN...
he is defiantly one of the tough men of trials. There are so many pre-madonnas in our world of trials who would have not made the second day. WELL DONE FUJI
-
Hi Victor
Iam about the same weight as you but only 6ft 1". I ride a standard spring setup on a Scorpa 4 stroke with very little issue,stiffer spring will be better though. However I would like to know the name of the shop who will make you the custom springs if you don't mind
Sean
-
thanks, will give it a go in the morning
-
dose iny one know what the carburetta setting are for the 250f HELP!!!
|
|