mcman56 Posted Tuesday at 06:46 PM Report Share Posted Tuesday at 06:46 PM I had the clutch cover off and am struggling to understand how the clutch actuator works. Every bike I remember controls the bike from the opposite side of the engine. A rod goes through and pushes the pressure plate out to create clearance and release the clutch. On this bike, the slave cylinder pushes in the opposite direction. So, is the movable pressure plate on the back side of the clutch pack when compared to other bikes? The parts list looks like that. Quote Link to comment Share on other sites More sharing options...
lsv Posted Tuesday at 08:22 PM Report Share Posted Tuesday at 08:22 PM Not unusual really, same as TLR's albeit they are cable operated...... Quote Link to comment Share on other sites More sharing options...
jonnyc21 Posted 1 hour ago Report Share Posted 1 hour ago Take a look from 4-42 to 4-45 of the service manual. should help enlighten how the clutch works. (2020 301 RR service manual: https://www.montesa.com/wp-content/uploads/2020/03/OSM-301RR-2020-EN-Web_V04.pdf ) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.