Gas Gas

Hi guys I have a 250 05 gas gas. Needs new forks the only ones I can find is a 450 05 any one no If thay will go on mine

Hi there Can anyone help,my jtr 350 1995 kick start keeps hitting my foot peg and i wounder if there is a stop some where to stop this happing. if you can shed some light on this please let me know. Also can any other kick start fit this bike? regards wayne

I finally removed the muffler bracket on a GG, annealed it to be safe, and bent it to a nice "s" shaped offset, and the tire no longer hits the muffler. For the time being... Replaced the rubbed-off rivets, too. 5/32", I think.

Hi guys, It's time to replace my rear brake pads (brake fluid damage). What brand is best? I really like the feel of the stock Hebo units, but am not sure that my dealer carries them. Hebo? Galfer? Apico? I tried the search function, but couldn't find anything on this topic. Your thoughts? Jeff

hi everyone, ive recently purchased a 2012 gasgas txt pro. it has lights on front and back but they do not work..any suggestions to why they wont turn on?...they are wired in but will not turn on. cheers.

Ok, so I rebuilt the rear suspension on my 2000 TXT200. Rear shock had a blown seal and I replaced all of the bearings in the linkage. Where do I start for static sag...1/2 inch and rider sag...2 inches? The knob for adjustment at the bottom is this for rebound? Lastly what would be a good starting/factory setup for it? I checked the static sag using a stand and measured the distance of rear sag and then with the weight of the bike and I have 2 inches of sag. I think this is ok. I'm 160lbs with gear. Thanks Peter

hi all i have a 2002 txt 280 standard for about 3 weeks. Still catching up on maintenance needed, and have attacked the rear suspension tonight and have found and not to my suprise everything dry as a bone!!! I've found an adjustment setting on the bottom of the shock that had been facing the engine and i didn't know it was there until i spun it around!! and i presume that it should face to the rear for adjustment? is this the rebound? My problem is the gold annodized rocker arms!! when i've spun the shock around they have reversed from the original position i.e dog bone to swing arm connectors, does this matter? or is there only one way to install them? Sorry f…

looking into anodizing my gasser 08 wheels before Christmas does anyone have any pics ???? Cheers Harry

Hi, Can anyone advise on the following- I have a 2002 gas gas 250 ( not pro ) with standard sprockets i want to go from a 11 tooth to a 12 tooth front sprocket, do i need to alter the length of the chain? Thanks

Came across this, you've probably seen it. Still interesting. http://www.youtube.com/watch?v=WSahhifhSfo...feature=related

So who's goning to get one (or already got one) and what do you think

Does anyone have some good settings for the 250 pro? I weigh 13 stone. Is there a good web source for sag settings etc?

Hi all I've got a 2001 50 boy txt. Could anyone point me in the right direction for a bottom and top end gasket kit for it? I've looked and rang lots of places but no joy.. I'm uk based if that helps Thanks steve

Can you decode VIN of GG Rookie: VTRGG0501A0710080 I'm looking for the following info: - prod year - model 50cc / 80cc Typical online vin decoders do not help. Thanks in advance

hi does anyone know of any breakers as im after a fan motor for my gas gas jt 250 1993,any help would be great cheers

I crashed my 05 125 pro on rocks on the gear shift. A very gentle crash and found my gear lever moving through 180 degrees. I thought the worse and expected to strip teh bike down at vast expense etc. Not true, good news. remove complete clucth (4mmm allen bolt in centre) behind the cluch is a spring and top hat device. The device has a shear pin in it that snaps under strain. Fit new one, end of problem. DO NOT lossen bolt to remove spring jus twiggle it free. new one comes with spring in correct set up. Good luck Graham UK

Hello, Just got my first trials bike, anyone know the oil to petrol mix ratio, best gear oil to put in, where i can get some spare plastics and what tire pressures to run on my jtx 200? Advice appreciated. Steve.

If it's not a contravention of the site rules, I found a source for a "cyclops"-type LED headlights (as used in my 2008 TXT) for a very reasonable price. The unit is a "Vision" from N2MOTO as listed on Alibaba. https://www.aliexpress.com/store/product/Dirt-bike-Motorcycle-Universal-Vision-LED-Headlight-as-GASGAS-TXT-PRO-280-125-Racing-motorcycle-head/1735717_32311456492.html The unit contains all parts and a light for < $20 (including shipping). I will be using this light on my son's TXT 70, and I'll report on the build quality and operation when it arrives. Thank you. Dale

Where can i get a clutch slave cylinder for a 1997 320 jtx clutch slave cylinder. Finding it hard to get parts for. Any ideas?

Does anyone know the resistance value of the source coil on a 03 280 pro? and how to test the HT coil?