|
-
anyone got any of these kicking about or where to get some from, I have
found them somewhere but at £8.38 each I think there a bit steep, I only
want the square nut if anyone no's what the technical term for them would
be.
-
I've used the S3 rim tapes on my ossa frame and its worked a treat
get it really hot and it bends round corners and its as tough as
old boots
-
lotus54 I've bit the bullet and ordered my suspension kit this morning
can you send me a photo of what you mean by
"I'd also recommend shimming and locktiting that middle pin, to make sure it doesn't come loose."
-
I've just had a price on one of these kits @ 600 euros plus 15 euros
p & p which is about £538 not sure I can justify that at the moment
-
so its well worth the money then ? I do worry that I dont grease my linkages enough do to
a lack of time and the quick spray of WD40 is going to come round and bite my in the a*** one day
-
Lotus54 just wondered how you are finding this new rear end set up after having a few months to ride with it
-
Sorry Peter I wouldnt know where to start, even with your instructions, only option I have
is to take it to the local dealer and they send the gearbox up to Nigel Birket for him to
press the bush in and out. I have the breather mod on my bike and run on 450ml
of nano tech what oil is everyone using ?
-
He said he had some Castro edge oil as n stock but he hadn't tried in an ossa yet, I'm using putoline nano tech which he recommend but he thinks it may be a bit thin
-
I've spoken to Nigel Birket today and the noise is coming from a bush on the
kick start side which holds something to do with second gear in the gearbox
it can be replaced but its not going to harm anything, he has said try a thicker oil
which may help it. but all in all nothing to worry about
-
Right I've just emptied out the coolant and there was no bitsin it
from the drain hole, I've taken the water pump off but cant seem
to get the circip off to have alook at the impella ?
-
wouldnt the waterpump do it all the time ?
-
No that's with it in second gear and the clutch on and off biting point, the coolant level was ok and looked ok
-
it wont let me add the video so the link to it is here
-
I'm planning i on getting a video later today
-
canada280i I ran it yesterday on the paddock stand with no load and
there was no noise
-
fitted by a dealer and they where the factory up dated plates, I cant feel it slipping
I like the biting point right at the end of the lever action
-
it only had a new clutch fitted in Feb 2015
-
No unfortunately it's clear
-
And there was a few tiny bits on the sump plug but not a lot
-
I must admit it had been longer than usual, about 8 weeks since its last change, I've checked the coolant and it was fine
-
-
I changed the oil the other day and it was a funny colour
How do I upload a photo of it ?
-
I've noticed over the last few weeks my bike seems to have a strange whine
when ridden, but only in second gear in all the other gears its fine. Its now got to
the point where other people can hear it as I'm riding, the bike its self is
riding ok. I'm going to try get a video of it as well
I've just been and started the bike to try and get a video of it running in second gear
on the workshop stand in the garage and it isnt making the whine so it must be
doing it under load
-
which end where you having issues with ? mines from the small
end not the cylinder end
-
I'm after some replacement braktec master cylinder rubber boots,
I've just got some Jitsie ones but the compound there made of
is two firm and they just keep folding inside out when you use
the clutch. has anyone found any decent flexable ones ?
|
|