jsp

get in touch with MRS i think there the uk importer for clice

Made a bleed device for the clutch, just pop it On the nipple open it and squeeze the bottle with The master cylinder lid off and hey presto

ordered the repair kit off Nigel Birket as the AJP kit fits the new braktec master cylinder just need to use the original washer and circlip. will I need to bleed the system ?

Got a bit of a weep from the braketech clutch master Cylinder, it's coming from the piston rubber. Is there any thing I can try before I spend £50 on A seal kit

Give Andy at Pennine Trialsport a ring He's got them all in stock

long carbon frame guards have just arrived from SRG Motorcycles in Italy fantastic service only paid for them on monday

Ossa uk recommend you use a small tube for the first section Then use a bigger diameter for the rest

Yes it is csp fuel cap from Steve Saunders it fits better than The plastic one and doesn't need the breather tube

Just had a play with a set of front s3 Rim tapes I had left over, get them hot Enough and they will mould to any shape

Done mine tonight, drilled it with 5.5mm drill and it stops At the splined bit, then tapped it out for a M6 bolt and fitted It with a copper washer, I've made a spare bolt to carry with me Just in case. Going to change the oil over the weekend And fill it back up with 450ml

What about Andy metcalfe can't he help

I've just taken the current breather elbow out and a m5 bolt looks like it will be too small, just inside the casing I can see a spline, am I tapping out the first part or the spline as well ?

yea same here, I've just ordered some m5 copper washers as soon as they come I'll have a look at it. i was hoping the current breather may be threaded now

excellent service from trial parts, breather come in todays post !!! jsp

found them at a place in Austria i think £75 posted so thats only double the price of the trick bits plastic ones but the carbon ones are twice as long

There not the long ones hendrik, you can get some that go right up the frame. loving it so far canada280i rode round all day yesterday with a big stupid grin on my face

Wonder if anyone knows where I can Get any long carbon frame guards, I Have seen them on a satellite teams Bikes but can't find where to but them

I certainly will, been and collected the factory 300 today First ride out tomorrow !!!

what about using s3 rim tapes on the frame there as tough as old boots

just had a reply from trialparts and they will post most places but the website isnt up to it at the moment but if you email him emi.koessel@googlemail.com I'm sure he will be happy to help only £3.70 to get one sent to the UK

or this one http://www.billetparts.co.uk/catalog/fantic-breatherfiller-p-146.html

are right i've tried to get one to the uk but it wont allow me to finish the order, just seen this one on a auction website http://www.ebay.co.uk/itm/Bultaco-Fantic-Trials-Gear-Box-Clutch-Oil-Filler-with-Breather-Sherpa-Pursang-/380840887715?pt=UK_Motorcycle_Parts&hash=item58abe2c5a3 its apprentley 12mm across the threads

where would you fit it, as a replacement for the filler point on the kick side start ?

spoke to the dealer that last worked on my bike and he had refilled it with 400ml of gear oil, got some clear tube on the way so i can keep an eye on it

When I got it the breather pipe had Been replaced and it goes right up the Frame and finishes up near the top of The air box, so the oil has to travel a Fair way up