|
-
the new factory replica bike is called a combat but the
ice hell model has been used as the base of the bike
-
thanks evo boy, I just cant make my mind up weather to have one or
wait for the 18 ice hell's ?
-
no but I know someone that's contacted them on friday and they
said all the details would be out the start of this week, I would have
thought there would have been a head line on on this page with
the photos and details
-
still no sign of a price or a spec on these factory bikes ?
-
http://www.vertigomotors.com/en/news/new-vertigo-combat-fajardo-replica-limited-edition-id-86.html
sorry I stand corrected its coming in 250 & 300
-
shame looks like its only coming in the 300 version
-
its howards glory hole !!!!
-
I run my ossa on 50ml of oil to 5 lits of fuel
-
didnt they used to fit them as standard on the TY250
rear mono shock suspension ?
-
I always fit a grease nipple into the head stock of
bikes I have, then after washing a quick pump with
a grease gun till I see the old grease coming back out
-
contact Dominik on the email below and he will sort you out
info@tpczech.com
-
-
so is the power supply already there ? Ossabc63 can you post a
photo of your set up ?
-
I think there is a level sensor in the tank on the rear brake side near the throttle
body, but I think the wires just end up behind the light, you could buy a small
light to act as a low level sensor but I dont know how it worked
-
Well I'd be in the line for another one, I love mine parts are still available in the
uk, and if your struggling Joa Hindren has a good supply in Finland
-
I had a go on a std 280 over the weekend and it rode really nice
-
mine came with all the o rings in place as per my drawing and then a bag with the spares in,
the 90 deg zerk did come fitted but to the front shaft up behind the bash plate
so I've moved it to the middle bolt, but I've not had time to finnsh building it back
up so I'm hoping once I get it all back together there will be some clearance
for the zerk in the middle bolt
-
yes that's great thanks, mine came with o rings fitted on both sides of the dogbones
which I have managed to get on and in, but like you say you cant see if they have been
crushed or not. I did also get a full new spare set in the kit
-
sorry for all the questions and the poor drawing, but where
had you added the shim, and are you adding it to extend the
centre bolt slightly to give it a bit more play ?
-
I've found out there a m6 x 0.75mm thread which I've manage to track
down and order some spares
-
no thats ok, is the 90d nipple close to the frame ?
-
lotus54 my rear end has come this week did you think of a better way
to describe the shimming, and if possible a photo of the 90d zerk
fitting in place as it looks like mine is going to catch on the frame behind
the foot rests
-
I all ways use electrical silicone grease in all the connectors
-
New sticker kit fitted this weekend, just not sure what to do with the
wheels the front one has the factory rim tape on and the the rear
is my spare wheel with the s3 rim tapes. I have got some
rim tapes in the sticker kit but they only cover half a wheel
-
thinking about it one of my mates has just got a milling machine
I might give him one to copy
|
|