lotus54

From what I’ve been hearing the last couple of years of the EM- they are quite reliable and take very little maintenance. Well, the usual wheel bearings, brake pads etc. but engine is almost nothing (so I hear anyway). I will know more in a year or so of owning one.

I think only the ‘Race’ (and new Escape R) have a real clutch. I cannot help on state of batteries. I think ‘Inch Perfect Trials’ in the UK is a good place to ask. Although I have not received any response to my question to them.

Latest word, through customs and probably shipped out to dealers this week. A long wait, but it should be loads of fun.

https://www.thehellteam.com/xiu-racing-kevlar-clutch-set-fr-st-ossa.html

Last I heard, Savannah Oct 24th. Slower than I hoped...but it will get here. I ride all year long, so not as critical as someone that cannot.

Thanks! That would be great info to know- I can pass along for others looking too.

I’m working on a 2014 280 (Explorer)- inner O-ring is bad so I need new ones. The ones I got are too large. I think they are 82 mm and 104mm (have to measure diameter). Does anyone know the correct size and if any GasGas O rings are correct? Otherwise I guess I’ll have to source some Vitron O rings at Granger or something (States).

I most certainly will be doing some videos. I’ll try it out on the super tight/slow ‘trails’ I like along with some more open ones, even a bit of road. Range will be interesting too.

On the way

To adjust properly, you need the software/hardware. Check to see that the throttle plate is closing all the way- and no air leaks. Checking with software to see ignition timing may be good too?

I ride that sort of stuff all the time. Much is very slow, tight lots of obstacles. Like 1/2MPH type speeds. Lots of steep hills- although almost all are the very tight, twisty type- NOT the loose, high speed type.

No, I have not gotten it. BUT it is reportedly crated and enroute now- so hope to get it by the first part of October. There were delays and I was hoping to have it before now. But the bonus is I got a ‘standard’ model with 21 upgrades, not a ‘one off’ Clutch model Escape that I originally ordered. As soon as I get it I’ll be doing some videos on it with how I like it. Not likely to do any trial competitions until after the first of the year (I rarely do them now), but should get lots of tight trail riding in.

I guy that I did work on his Explorer was looking into fitting something. He is a fabricator and I suggested a spare head to do any work on. I’m not sure where the coolant jackets are on the head. I have not heard if he ever did it or not. I found by fitting my ‘super easy start’ setup, the bike was a lot easer to start (tiny LiPo 12V battery fitted with momentary switch to activate, power up fuel pump and ecu)

There is a test for the master relay also if I recall. the person I sold my Explorer to had the fan quit. I had him hook up the software, and the fan would run just fine in test mode. Turns out the temp sensor in the head was bad. I do not have any resistance readings, but Lewisport had new ones. He replaced and it works great. I did have a fan fail a few years ago- I believe the same SPAL fan the GasGas uses on one of its models. I suspect either wiring, connections or the main relay if the fan works by directly connecting to power.

Some delays (not surprising)- but supposed to be enroute to the States now. Can’t wait!

I suggest connecting diagnostic software. Not only will it run the fuel pump (with 12V battery attatched) and make sure primed, but it is a really quick way to discover issues. The error ‘tab’ will show historic errors.

I ordered a ‘special order’ Escape with clutch almost 2 months ago. In the meantime, they have decieded to make a regular production ‘R’ and now they have released it. I will likely get it in a month (in the States, shipping is slow). Can’t wait!

This place in Europe says they can repair https://nonstopmotoren.com/product/gearboxrp-gearbox-repair/

I carefully reinstalled the gearbox this morning. Along with clutch, side cover and a few other things. Fired up in just a few kicks, shifts great! Glad Adrian could fix the customer up at a reasonable price. Now to connect the computer and fine tune it, and make sure I got the list of other stuff fixed. Oddly, one that that didn’t work is the taillamp. It was wired up incorrectly- sure looked like factory to me. I could pop the pins out and fix. This bike has only 27 hours on it. good to get another OSSA back into use. Mark

Adrian at Lewisport had everything- I just had him do the work, since he has done a bunch and has jigs etc.

Thanks!

I see it is a website for a manufacturer. Do they sell OSSA gearbox parts as well?

PM me your email

Here are some pics of the gearbox for those interested. What a neat setup.

My understanding is they didn’t really merge with GasGas, but they did have a production and parts distribution agreement. So when GasGas went under, they no longer had a factory or warehouse. Of course, the story I was told is the whole reason to do this agreement was to save money, secure more loans and both companies to keep afloat. So I assume OSSA was barely afloat anyway. I have communicated withe the ‘owner’ that has claimed several times to ‘be ready for production soon’- of course that didn’t happen. I did see they were making bicycles, but I do not know what has happened with that. personally, I’m disappointed it could not keep producing bikes. I found them to be excellent (a bit of teething issues at first). For my use, I would have liked a little more robust suspension linkage setup and a better ‘easy start’. Interestingly, the 2012 Explorer I have in my shop right now has a little battery- so fuel pump runs when the key is turned on. Makes it easier to start I think (like my ‘super easy start’ setup). But indeed- they have not produced bikes since the 2015 model as far as I’ve been able to determine. And no, not at all like the 1970 model, in name and place of construction only.