barrybaines

I did turn the barrel slightly too gain clearence I admit! As for getting the sump guards on Most probably the hardest easy looking job going!

I for one think this could be the best way too go

Have you got spacers in there? Must say though I managed too fold mine in half today and she popped right back in place

seeing as you asked so politley! wasn't completely gone after yesterday but today I finished it off! along with myself

I think a comment that was posted on Bikespaces lost ground post said it all for me in the fact that if you have land advertising it on the web may cause more harm than good! such a shame but we are lucky enough too (if you enter the odd trial) be a good enough bunch too talk between ourselves

Come on then, let's have the crash piccy's Would love to but he's away and it was on the most daft end of day no camera type play area ( the near demolition of the front wheel is a total differnt story )

That really is a shame! Honestly though when they previewed the 800 last year they may get somewere in the coming years!

Had my first play with the Raptors today and they are awesome However I need too ask....... Has anyone else found the 07 rear mudguards a lot more brittle than previous years? ( this may end up costing me a small fortune unless I learn too ride properly soon!) Question 2 are the 4t ones as brittle?

Just done the rings on my '04 (after it chewed it up and spat it out!) easy enough too do although a bit costly for what you need!

Haha how about the "OK" button on the bottom left of the box you just pasted the URL into?

Obviously i put it on wrong on purpose, just to see if anyone noticed I am just a typical bloke. 1st thing to do when you get anything new is to throw the instructions away Thanks chaps !! Will look much bettter now you've got it sorted

Brad you are RUBBISH HERE is Marky boys flamed out Scorpa a few pictures throughout the topic click on them too enlarge

Out of interest I just done a quick search and found THIS which tells me my Vectra is OK for 75KG but then HERE May not tell you what you want too here about the Punto!

Do you have a link for that picture? I reckon they mean THIS guy

are the jubilie clips on your exhaust gaurd not meant too go through a loop on the inside of it? Looking good though

Woohoo Raptors have arrived now my bike really is complete (Now I really must stop spending)

yes i have and to no avail. it is a parts list.thanks. Can you not find the oil fill hole on a parts list? maybe you should leave it too someone else then!

have you looked at the manual from this post? Here

Got some nice shots there especially the MCN girls

Fair result Justin Beat Ralph anyway Nice too see Dad got a good result in the oldies class too P.s after all that I may give the dishes a miss next week

Just quickly (not gonna mess about too much yet) but the forks preload adjuster is flush with the fork leg and the rear spring is wound up only about 5mm from the bottom, so it's nice and soft like I said I'm not gonna start playing with the rebound too find where it is as I'm out on it tomorrow As for the pegs the ones on there do feel nice and stable and grippy enough but I'm sure would fill with mud in no time. Personally after all the great response from people on the Raptors have put an order in for a set but as said on another thread about pegs used too have Trialcast ones which are absolutley faultless.... I'm just a bit of a tart and fancied some bling whenever they turn up! Fast action throttle fitted and shall be staying on there as I am used too this set up from my previous bike (although this one is much pokier yet silky smooth)

This really is going too be the most expensive Techno going! Doing the rings alone will cost you around