| |
-
hello, I have some if you leave me the email I will send them to you
-
Have you tried to insert the R2 mapping wet? I am finding myself very well.
-
-
Hi, you triggered the spring ...
You have to load it up, you have to give it a ride and fit it where it is now.
-
Anyone have wet mapping or very soft mapping to use the Vertigo?
I tried the Gas Gases and they are much easier.
I tried to do it with the software but it creates too much vacuum in the first part of the throttle, and then I think that one made by the house is designed to make the engine run better.
-
I want to buy the wificom module, can you tell me the factory code.
I don't want to buy it from an official dealer.
Can anyone help me?
I don't know if the code is: GK-WFCOM2-0003 or GK-WFCOM2-0001
If anyone can help me
Thanks
-
Manual sent, who is still missing?
-
I was wondering in the 2018 model there is no switch to change the mappings like on the other models.
Is it possible to put a switch also in 2018?
As was done for the Bones, it was enough to switch 2 pins
-
Thank you all for the manual, arrived.
Thanks..
-
Hello, interested in the 2016 manual
I'll leave the email if anyone can send it to me
bernardi.simone@live.it
Thanks
-
I have a slightly prepared 2018, I don't know what, I bought it like this ... it has a titanium exhaust and the head has been modified and I don't know the mapping.
-
Thank you ... Ordered now, I hope I get something and it works because I ordered it at a bargain price from another continent
-
Thanks for the maps ..
Do you all use the wificom to connect with bluetooth or are there other devices?
I am undecided whether to buy it or not since it costs very little.
-
To remove the injector you have to remove the ecu and also its support which is fixed with the same screws as the injector.
-
Congratulations as always Lotus!
-
Hello and welcome, I think you should build the cable because it is still new but has very high prices.
For the software if you scroll the pages there should be a link to download it
-
Thank you,
weekend I change the gearbox oil and as I disassemble I check all the connectors again.
I will also check the temperature sensor.
The spark plug has about 30 hours of work, replaced as soon as the motorcycle is bought.
The bike smokes enough until it warms up, and when it is hot it smokes very little.
Thanks again.
-
I have found many discrepancies on various sites for these two models.
I thought they were practically the same and that only the colors changed.
Is anyone able to elucidate me?
On the Ossa website he says that there are different cases in one 350g of oil and 450g in the other.
The total weight of the bikes is 2 kg different
They have different gearbox bearings.
I thought they were the same ?
Do you know anything about it?
Thank you
-
What a show, beautiful !!! I think that compared to the normal model 300 yours is already stronger since it has Termignoni exhaust. Very very beautiful it looks new. I have not yet tried to connect the cable for fear of doing damage !!
-
Hi, thanks for the help .. The fan does not turn immediately. It turns well in cold weather, has the correct engine revs. I cleaned all the connectors and sprayed the spray I just bought a few months ago. The ECU connector, however, I did not, but they were all in good condition and clean.
-
I don't open another psot to not mess up the site ..
My bike, from the cold starts immediately first second shot goes into motion.
When it is hot, it is hard for me to kick many times, and often when it starts it has very low turns and goes off.
What can it be?
Thank you
-
Congratulations on the girls ...
The mappings posted above are for the 300cc so I don't think they work on yours.
If you post your mail we can send it to you
-
For those interested, I recovered some maps from the dealership, I think they are different from the usual ones.
For fear of doing damage, I have not tried any yet.
I attach them below.
20130908_Tr300i_2014_Evo4.doc 20130730_Tr300i_2014_Evo3.doc 20140423_TR300i_SSDT_1_Soft_2_Road ++. Doc 20140423_TR300i_SSDT_1_Hard_2_Road ++. Doc 20140331_XM_Tr300i_Evo6.doc 20140116_Roby_Racing_2014.doc 20140116_Ossa_Tr300i_Gubian_ORT.doc
CHANGE THE EXTENSION WITH .KDA
-
Penso che sia una buona idea indicare dove acquistare le nostre parti di bici
https://www.zonetrial.com/Articles.aspx?langue=E&MarkSelected=Ossa&topic=0
https://trialstribulations.net/index.php?main_page=index&manufacturers_id=7&sort=20a&page=3&zenid=6od90vt7vtam74t4n365i36kv7
-
Hi Lotus, so yours has the Termignoni exhaust.
That model says it's very bad, due to the mapping it has installed.
I come from a Beta Evo 4t that was practically unmanageable!
Extremely sensitive accelerator and lots of torque.
The Ossa is another planet, much more drivable.
|
|
