Simonelongus

Thank you, I will try to build the cable. I have many mappings that were given to me by the Italian importer. As soon as I build the cable , I will update you. Right now it's almost unrideable because at low revs it doesn't go it's very smooth, but as soon as it goes up the revs it goes off abruptly. Thank you.

Okay so I take it that this is not normal. I have to build the wire, now I'll get into it. Thanks

Found the problem and solved it at great expense!!! Eventually when the bike started to heat up the main bearings seized up. I gave and then gave again to figure it out until they really seized and I figured out where the problem was. The engine now has new bearings!!! Question: is it a 280cc is it normal that at low revs it runs poorly and as soon as it gets up a little bit of revs it suddenly shoots out power? I can't drive it much.... Is it a mapping problem or are they all like that? Thanks

Thank you for your immediate response. The problem was the injection cable not making good contact!!! I hope that was all it was. I give you my best compliments for your efforts and the book you made!!!

Hello everyone It's been a while since I've posted and in fact I've relapsed!!! I bought back an Ossa , I was in love with it!! and from late 2012 so a 2013 even though it has the ECU marked still with 11 final. I'm writing because I have a problem, when the bike is nice and warm it shuts off on me, like it's running out of gas, it revs up as I ask and then drops goes up and then drops all the time. I don't know what to look at. Unfortunately I had sold everything kscan harnesses etc.... I can't tell if it stops getting spark or stops getting gasoline for a few moments. Thanks Translated with DeepL.com (free version)

hello, I have some if you leave me the email I will send them to you

Have you tried to insert the R2 mapping wet? I am finding myself very well.

Thank you :-)

Hi, you triggered the spring ... You have to load it up, you have to give it a ride and fit it where it is now.

Anyone have wet mapping or very soft mapping to use the Vertigo? I tried the Gas Gases and they are much easier. I tried to do it with the software but it creates too much vacuum in the first part of the throttle, and then I think that one made by the house is designed to make the engine run better.

I want to buy the wificom module, can you tell me the factory code. I don't want to buy it from an official dealer. Can anyone help me? I don't know if the code is: GK-WFCOM2-0003 or GK-WFCOM2-0001 If anyone can help me Thanks

Manual sent, who is still missing?

I was wondering in the 2018 model there is no switch to change the mappings like on the other models. Is it possible to put a switch also in 2018? As was done for the Bones, it was enough to switch 2 pins

Thank you all for the manual, arrived. Thanks..

Hello, interested in the 2016 manual I'll leave the email if anyone can send it to me bernardi.simone@live.it Thanks

I have a slightly prepared 2018, I don't know what, I bought it like this ... it has a titanium exhaust and the head has been modified and I don't know the mapping.

Thank you ... Ordered now, I hope I get something and it works because I ordered it at a bargain price from another continent

Thanks for the maps .. Do you all use the wificom to connect with bluetooth or are there other devices? I am undecided whether to buy it or not since it costs very little.

To remove the injector you have to remove the ecu and also its support which is fixed with the same screws as the injector.

Congratulations as always Lotus!

Hello and welcome, I think you should build the cable because it is still new but has very high prices. For the software if you scroll the pages there should be a link to download it

Thank you, weekend I change the gearbox oil and as I disassemble I check all the connectors again. I will also check the temperature sensor. The spark plug has about 30 hours of work, replaced as soon as the motorcycle is bought. The bike smokes enough until it warms up, and when it is hot it smokes very little. Thanks again.

I have found many discrepancies on various sites for these two models. I thought they were practically the same and that only the colors changed. Is anyone able to elucidate me? On the Ossa website he says that there are different cases in one 350g of oil and 450g in the other. The total weight of the bikes is 2 kg different They have different gearbox bearings. I thought they were the same ? Do you know anything about it? Thank you

What a show, beautiful !!! I think that compared to the normal model 300 yours is already stronger since it has Termignoni exhaust. Very very beautiful it looks new. I have not yet tried to connect the cable for fear of doing damage !!

Hi, thanks for the help .. The fan does not turn immediately. It turns well in cold weather, has the correct engine revs. I cleaned all the connectors and sprayed the spray I just bought a few months ago. The ECU connector, however, I did not, but they were all in good condition and clean.