blackrandomapple

i seem to rememeber some one saying about a farm up broadway! Just getting fed up of practicing in the same place

Cool, Hopefully he will send over the details, Im not sure but i did a trial (ron carter SVMC) up there! if its the same one then it looks great

wasnt quite sure where to post this, but im looking for the contact number for Top Farm in gloucestershire, I have heard they allow practice there but you need to contact farmer???!?? If anyone has any detail can you let me know! Regards James

Ok i will get some pics up soon and some instructions, The original idead was placed on a power bleeder, I used a cheapo halfords car brake blledibg kit and converted it to be used on a motobike!

Or just keep the bars you got on it already

surly the rise is gunna be massive

you could take the top yoke of and bore it out but the only removable part are the top clamps

Probably best goin to a shop, I had a budget of about 100, so i bought a

I think we are the only ones that didnt know how to do it properly

Pete, You could make them at work

Im sure there are a few people who would benefit from this, I have a 2001 beta rev 3 250 and my bro has a 2003 rev 3 270 Both of us are looking to get new plastics and decals etc but we aint 100% sure what plastics will fit, obviosly we want the newest plastics available that will fit! Thanks in advance James

I have done some research on the snapping, it seems to be a fault in the program, After a random time it will snap with no warning even if you just leave it for a while without clicking,

Here is one i have just done, I have used the polygonal lasso tool took me about 20mins, I believe there are many ways for colour popping but i find lasso best! P.S does anyone get the same propb as me using polygonal lasso, when your half way through selecting its snaps and joins start to finish with no warning? i have found a way around it but its really annoying

its all about time, it takes ages and ages but looks good in the end!

Done-it, Woop wooop, I made a cap to go on master cylinder with a sealed hose, using presure from the front trye and a few other bits and bobs i have managed an air free system! Thank god for that

Thought this was a pretty cool pic, taken at killkenny in gloucestershire

Okay, i have nearly done it but it still aint quite right, The brake now works quite well but i still have to use 2 fingers and squeeze hard Before i took it apart all i needed was one finger and ill be over the handle bars As it is im not sure i will be able to get used to it

I have tried with a syring, tried every possible way i think, I have bought a bleed kit from halfords it consists of 2 pieces of pipe and a one way valve but not sure im using it correctly as there are no instructions, Has anyone tried a one way valve?!? How does it work? Regards

Having real trouble bleeding front brake after taking it apart! Was working spot on before i took it apart, Also trying to bleed my brothers bike has he has a new caliper! Thanks in advance, P.s I have tried almost everything already, still no joy tho

I thought it would be the stator from the ohms you said, From what i know stators can go at any time even when there new! lets hope yours will last!

Nice one! I had big problems trying to sort mine out, this should help loads if people!

There are som hot girls there

I caught it in the end, Was a tad short, stil good tho! They should have more trials on tv!

Dam-it, Is he on the first or second half of the program?

A beta 80 or 125 at a guess, i see alot of younger people on 125's