EM (Electric Motion)

Should the front disc have play in it or be solid? I could hear a noise from the front wheel area and found the disc has play in it, the bolts are tight but it looks like some kind of washer has degraded maybe allowing side to side play on the disc. I'm thinking it shouldnt move but always best to check lol and were can i get replacement washers form if it these that are the issue. I have two 2021 bikes and its the same on both

Just bought a 2024 Sport model and really enjoying it. Certainly a big adjustment from my Sherco 250. This was my very first try right out of the crate last week... I was fooling around with the clutch and winding it up for no reason. This was this week (snow is gone) - a lot quieter you can hear the sound of the X11s on the driveway

Being new to trials bikes and coming from mountain bike background, how is best to set up the rear shock for my weight? At the minute it feels quite wallowy, should it have more rebound and is it a case of adjusting or buying a new spring for my weight (will any make of spring do or are they manufacturer dependent?) Cheers

I've just come across an issue with my Domino throttle. After a small inversion that has left the throttle with a minor scar in the plastic (which may be a red herring), it has become sticky. Off the bike or with the clamp screws loose, it is fine. As soon as I start to tighten the clamp screws the self-closing disappears. I've tried packing the clamps with a thin piece of plastic: no good. I've tried tightening the clamp screws with the throttle off the handlebar and it works fine. Any ideas? I'm reluctant to take the throttle apart because of the return spring and the alignment of the gears, but that is looking like it will have to be my next move.

Can anyone here elaborate on the operation of the PRBR? Specifically I'm wondering if it could serve as the sole rear brake, my disability makes a right foot brake useless for me. I've found a couple of online reports of experienced riders removing their clutch levers and using the PRBR lever from the non clutch model and in at least one case removing the rear brake pedal. I really can't imagine riding a dirt bike without a clutch but i have no significant experience with electric bikes.

Might be a daft question but are they universal or specific as i see some with the bike type referenced but others not? Which will fit an Epure race 2021? Cheers

Hi All, Total newbie here but i've just bought the Epure race (2 actually, one for the boy). Theres a sound that sounds like a grinding bearing when you add power could this be the drive bearing? I only came to this conclusion after seeing what parts were available and if so is it an easy swap as i cant find any real info out there on the motor and would much rather do it myself. Hope this makes sense!

Just picked up a demo model and would like install an hour meter. Does anyone have recommendations?

My old 21 Escape R apparently has had some throttle damage. I remember reading here someplace that a replacement (Domino?) has been used with good results and the quality was better (stock was not great). I cannot find it, please help if anyone knows. (Note, I no longer own the bike, just helping owner out). Mark

I've just bought an ex-school 2023 ePure Race from Inch Perfect. It looks beautiful and I'm generally very happy with it, but like any secondhand (or even new) bike there are one or two things to sort out. I'm not impressed with the way the TKO switch is mounted. It's awkwardly inaccessible and is mounted on a curved bit of frame tube so it doesn't fit well. As a consequence mud and water can get into the back of the switch, which has happened. I'm thinking of putting it on the handlebars instead. Has anyone else tried that? It would require a two wire extension about 1 metre long (I haven't measured it yet) with male and female connectors. I can find pre-wired connect…

My controller seems to be jammed on the reset function. I've renewed the switch which hasn't cured it. Any ideas what to do next?

Have a new 23 epure (not race). I’m struggling with the lack of feel in the rear brake. I’ve been riding a 5.7 since err 2014! Upgraded in 2016 and from the getgo converted the back brake to left handlebar mount (like my mountain bike) primarily to stop the woohoo let’s go backwards free wheel experience when the motor cuts on a sudden load (going over a log fast uphill). You only do it once! 23 has the anti reverse- nice so I thought I’d be a big boy again and go foot brake but it’s horrible no feel it’s nearly put me over the bars - it’s like a very good parking brake! I use the PRB but I like the throttle against the rear brake to tighten turns and the PRB doesn’t …

Missus' 2021 epure race. I fitted a new chain and set it up like every other bike I have ever done - one finger gap between the spring adjuster and the swinging arm. Now it has a squeak - like a dry brake squeak which seems to come from the output sprocket at the motor end. We have both ridden it for a while but it is still there. Brake is fine and has not been touched, not had the back wheel out. No play in wheel bearings or gearbox output shaft as far as I can detect. I have backed the tension off a bit and the noise has gone. Squeak was in time with wheel rotations so it is somewhere or somehow related to that. My guess is a wheel bearing, but there is …

Hello everyone, I purchased a new 2023 EPure Race trails bike about a month ago. This is my first trails bike so I am pretty excited about it. Last week I rode the bike with zero mechanical issues. A few days later, I rode the bike again, but this time as soon as I gave it throttle the clutch was slipping, and it was very apparent. The slightest incline, causes the bike to struggle and I can just hear the motor wind up but very little power. I have ridden dirt bikes, all my life, but are new to trials. I have not been beating on the bike hard or popping clutch at high RPMs a lot. I do the occasional clutch pop getting over down trees but that’s about it. I checked th…

My rear shock from my 2022 EPR is blown. I do not want to spend big bucks, so I am thinking rebuild Vs a used R16V? If so, is there a single size for the R16V?

2023 Epure Race, manual pgs 33 and 35 and 36, TKO and TC Traction control do not seem to work, even after reset. (The FRB, motor braking works) EM Connect, the app, I can't get through the screen to enter a code. I have worked with the dealer, who is sending me a switch and diagnostic cable. Dealer says the feature is new and optional, it doesn't know. I have emailed EM France without any reply on these three issues. Is there something the dealer and I are missing? Thank you. John

I had never paid much attention to the breather tube on the clutch/primary drive case until today. While doing a bit of fettling I noticed that the oil was milky, so obviously I changed it. When I looked for a cause I spotted that the breather tube ended near the swing arm pivot. Well, last weekend I washed the bike after a trial by riding through some deepish water. The end of the tube would have been under water so I'm assuming it sucked up a bit of water then. I've no re-routed the pipe to finish near the spring top mount. Just a heads-up to anyone else to check it before they fill their clutch with mayonnaise. And on a different (but related) note, what was the d…

howdy ! I'm looking for someone that has gotten there e-pure race plated. Or suggestions on parts that work good with other bikes. what did yall use for head light set up? brake light? just looking for technical information from some one that hade done this already ! I've been riding dirty on the road and I'm sure I'm pushing my luck. There is just to many good loading docks and church parking lots not to. (loc. WA state) thanks!

I've not yet opened the flywheel cover of my 2021 Race, even though I've had the bike for over 2 years. However, looking at the instructional videos on the EM website, it looks like the flywheel has 2 extra discs held by a ring of 6 screws. Am I right? Has anyone here tried removing the weights? As I don't use the clutch I'm thinking that I don't need the flywheel for winding up inertia before dumping the clutch. Instead I think I may get a little bit more snap for lifting over logs if the flywheel is lighter.

anyi one whith a 2023 has try it? https://play.google.com/store/apps/details?id=com.em.emconnect you need to scan the qr code of the owner manual or a sticker on the right side of the bike