Gas Gas

Hi, I have just bought a 2005 Gas Gas TXT 250 pro, returning to trials after many years off. I'm not sure if this is a fault or an adjustment but I can left the rear end over an inch (25-30mm ish) before the rear shock engages and starts to extend. The adjustment on the shock is wound down so there is only about 50mm left. The swinging arm doesn't seem to have any play. What should I be looking for. All previous bikes have been twin shock.

Can anyone tell me the correct part number for the braktec mineral oil clutch master cylinder rebuild kit for a 2014 TXT 280 Pro. I was told that certain years took a special kit?

Can you decode VIN of GG Rookie: VTRGG0501A0710080 I'm looking for the following info: - prod year - model 50cc / 80cc Typical online vin decoders do not help. Thanks in advance

Hi, Going to buy GG Rookie 80 2008 for my son and would like to ask you how do you evaluate this bike, parts availability etc ? I posted some photos also, tell me please if you see something weird, something I should pay attention.

Hello, what's the recommended gap to flywheel please? And also spark plug gap? Could a pick up coil cause hot starting issues?? Can I buy a replacement easily? Thanks in advance. Gary

One from the archives of 15 years ago...

Bonjour comment enlever le roulement à aiguille du fond de l'axe de kick. merci

Bonjour voilà changer piston cylindre sur ma txt 300 .Le problème il y a beaucoup de compression.ma question pour son 1 ère demarrage je peux la pousser. merci.

Bonjour comment changer ce pignon faut il retirer l'embrayage. Merci

Anyone know how much lighter in kilograms a new gas gas is in comparison to my txt pro 280 02 model . Thanks

Hi All, Long story short, I have a 2021 250 TXT Racing and a 2003 TXT 250 Edition so friends can come out to play now and then. Obviously the new bike is lighter and I understand the factory spec to be 64kg I have been unable to find any data on the Edition, which I understand was a discounted model using older engines before the launch of the new TXT range in 2003 Does anybody happen to know what it weighs, please? Happily, it is still competitive at entry level and starts first kick, which is more than can be said for the 2021 bike, unfortunately! Thanks and happy riding.

There’s a bike for sale advertised as a “GasGas 198cc trials bike” 2012 model. I can’t trace any information on such a bike. Is this an error in the advert? thanks in hope.

Hi guys, have an issue, I have snapped every bracket on my exhaust today, it has been welded multiple times by the previous owner. it’s an early 2010 model so shares the same exhaust as 08 and 09. Not the later 2010 model. Any ideas where I may get one from? thanks

Long story short my gas gas was stolen and the fenders were cut off in order to disguise it, I ended up tracking it down and getting it back but she's in rough shape! i'm having a lot of trouble finding replacement fenders (front and rear) and radiator shrouds for it to get it back looking good again. Are they even available and if not, has anyone attempted or know if it's doable to update to the newer style that has the separate seat area? Any help would be much appreciated! Thanks.

Bonsoir ou trouver revue technique pour gasgas txt 300 de 2012 car je dois démonter volant magnetique. Merci

Bonjour mon cable des gas est casser juste au bout .ma question peut on en faire un sois même car 30 euro plus livraison c'est cher. Merci de votre aide

Bonjour voilà changement bougie nouvelle bobine et cable nouveau capuchon bougie.mais j'ai toujours l'impression d'une etincelle faible.les masses sont bonnes.avez vous solution ?????? CDI.. BOBINE allumage oxydée...

Bonjour comment savoir si bielle d'une TXT 300 de 2012 est foutue...... Merci

Not exactly trials but there’s an ‘02 Pampara for sale that looks in good condition. Are parts available at all or would this be a mistake?

Hi folks. I'm a Long time MX rider and I just bought a 1998 Gas Gas TX280. I'm struggling to find a rear fender to replace my faded one presently installed. I'm sure it's brittle and living on borrowed time. Definitely can't find anyone making an after-market replacement. Also, has anyone made a light foam seat that can attach for a trials bike just to take a break on? Any solid help would be appreciated. Thanks!! Benny.