Gas Gas

I am wondering how much sag is recommended for the front forks on a TXT200? If I understand right sag should be set at about 1/3 of travel. I'm not sure what the total travel on my bike is. Anyone know these measurements?

Hi, i`ve just bought my son a gasser which I thought was a 125 but I think may be bigger, It wasn`t running when we got it as it had no compression and upon inspection it needs new piston rings. However the piston measures 60mm diam. Can anyone let me know what size this would make it and if anyone has any spares kindly let me know by PM. Cheers Andy

Just notice when checking clutch that water is mixing with oil in the gearbox,i think it must be leaking through the water pump amd was wanted to no if it is easy enough of a job to sort and wat is involed in changing the seal. Also when taking about the clutch wound anyone know the thickness off the plates should be. 1999 270 txt

Helloo Strange quistion but the workspace' floor is coated so I cannot enter. I noticed I dont have the torxdriver which fits on the airbox, but since I cannot enter the workshop I dont know which one I dont have, lol. I have all sized in small bits for the socketwrench but those are too fat and the bolds are too deep. So I want to buy a correct tool but anyone can check which size I need?

Just bought a 2010 raga with a number board on the front purchased a genuine headlamp for it and found the wiring has been cut out . Has anyone got a wiring diagram or any images to help me wiring it back to factory please Really appreciate it Brett

Everytime I go out for a ride, my licenseplate jams into my rear tire... The plate looks like crap after 3 weeks and is starting to crack... Any of you guys have a solution for this? Perhaps another plateholder? GreetZ, Peet

Does anyone make a soft rubber or silicone connection from air box to carb 2014 txt? Need to replace mine and if soft one available could possibly remove carb without removing rear section, thanks for any advice?

I wonder if there are anyone here who has done more to their TXT 70/80 than just the obvious mods, for example as described on the US GasGas homepage. I have taken the engine apart, cleaned it, rebuilt it with new bearings, seals and so on. I have tried the mods to the standard Dellorto carb (raising the needle and grinding a 2mm nothch in the thottle) and I have tried taping off various parts of the airbox intake. And it works OK even if it has to be leaned out under certain conditions. Problem is, when the rider (my son) gets more experienced, he need a bit more power and crisper power delivery. I have been thinking of boring out the cylinder to the class limit (80 c…

Hi, recently my fan has decided to engage as soon as the engine is running, thermostat gone? or is there any other common faults? cheers

Just to let you guys know that regs for the 2009 Vic Brittain, to be held on 4th Jan are now on the Midland Centre ACU web site for download. Hope you enjoy!! http://www.midlandcentreacu.org.uk/page5.html

ive bust the slave cylinder on my gas gas txt 2001 and i grudge going to gas gas direct, does anyone know if any other bike manufacture parts fit ive been looking on ebay and alot of them are pretty similar. help appreciated cal

Bonsoir ou trouver revue technique pour gasgas txt 300 de 2012 car je dois démonter volant magnetique. Merci

Can anyone help me with carb setup (airscrew?), engine diagrams, maintenance manual? I have got the user manual and the downloads off TrialspartsUSA (wiring diagram, airbox mod) and am aware of the thicker clutch plate mod. Thanks for any help.

I need to 'tune' the carb and after cleaning it can anyone let me know a good base position from which to start with. How many turns on the mixture screw?

Hi, I need a new back tyre and just after some advice price wise not much difference..between x light and X11 I have been told x light isn't as durable but I only ride approx 20 times a year mix of rocky streams and forestry type terrain.. I am a novice so will I notice any diffence anyway lol.. Any advice would be welcome.. Thanks

Anyone has experience with these parts or whole clutch. Looks fancy and usefull, bit (too) expensive though http://www.arrow-moto.com/ (down the page) I saw them before some times, they are from the designer of the pro engine.

How many links should the chain be on a TXT250 (2001 model) using 44/11 sprockets?

I've just bought myself a JTX and it has some kind of digital readout mounted in the fuel tank. What is it and how do I use it? Anyone have an instruction manual for one of these I could borrow?

I'm stock at 11/42 but do wonder how other options perform when you have more trails to ride. On single track the 4th to 5th jump can be a pisser in some situations, hehe thanks guys

had a shot on the new 07 250 as a clubman rider i didnt notice much difference the whole thing feels lighter 10 uot of 10 for the black powder coat and new graphics. Thanks gary for trusting us not to bend it.