| |
-
I thought about this myself, but by the time the bolts in, there's petrol all over the place
-
-
good idea but is there a easyer way??
-
Anybody shine some light on this, took the carb off today to clean it, however when i pulled the fuel pipe off the pump the fuel just kept coming out.
pls dont tell me I need to drain the every time I do maintance on the bike?????
as always thanks in advance
-
never seen any for a 03 but you could get some made up
-
3m carbon fibre sheet, cut it to shape
-
sell it and get another sherco !!!!!
-
Hi, I did both sides just for peace of mind to be fair
-
well you crack on and spend double that
-
I believe you get what you pay for
-
but for the price what do you expect????
-
Well I have to disagree there, I have a set from that shop and for
-
-
Spray some carb cleaner around the flywheel and carb boot, if you see the cleaner been sucked in, its drawing the air in.
But before all this clean everthing
-
I sprayed my tank on my sherco, plastic primer first and a light sanding, then the colour, petrol laqure next,
Just be very careful sanding it
-
cheap and cheerful, but I have no problem with them.
Saying that I did come off my bike and the clice pants didnt rip
-
-
-
you need to make sure that everything is clean, carb, airbox and filter
like cope said it might be the crack seals, easy way to check is to spray some carb cleaner around the flywheel and look for it be sucked.
how did you clean the jets ??? it sound like fueling to me
-
air filter and box cleaned
-
well am a rocker so am going with this
http://www.youtube.com/watch?v=GECit4oSpbk
-
Hi and welcome ,
If you have problems with the bike, best post it in the section under bike specific forum
-
-
-
Just having a look on t'bay and came across this 180549601566
The guy say's its a 06 but am sure that it has 03 stickers,
What do you think???
|
|
