bultacorock

Hi Trialsrfun I need my hubs on my 199A relined, I have found Paul Jackson Outlane Engineering ? address but can not find a phone number could you send me his number please BR I have a base not far from Manchester so Hudderfield is very handy Hi watch this i had a 198 from new i still think the red and silver ones are the best looking bikes bultaco made

Hi Boghopper, Sorry to hear that hope you manage to get a deal on getting it fixed BR

Hi Nelly1 good to hear you had a good ride, they have some great venues not too far from Frodsham im just keeping a look out for there 2014 dates to see which i can get over for. Hi Coops did i post any photos of you ? number not always visible ... bike boots helmet may work ... i have a few more i mainly tried to make photos of the riders i had seen before who seemed happy to have a photo taken of them i can have a look to see if i have any you if you would like one posted BR

Here are the last set of photos was really good day out lots of great sections the boys on the pre 65s were really good, i heard one of the best riders on a new bike say how did he manage to clean that section on his pre 65 he was really impressed it was great to watch them ride, BR

I had a look around to try and find a spot were i was out of the way but that i had a bit of room for me and a clear shot of the section, it was great to watch the riders in this section lots of mud both sides of the log BR

A Great day out watching and try to get some photos Frodsham & District M.C.C trial on sunday the 5th jan 2014 spotted 2 relly nice looking pre 65s just before the start the were also a few nice twinshocks at the event to here are some of the photos i made BR

Thanks for the feed back Bullylover yes the lever has a nice feel to it even made the clutch feel nice and soft it was just a bit of a reach but i will try to get use to them, looking at the levers i think the blades have bent out a bit more from been dropped Hi Bondy Thanks for the feed back Boghopper350 the tip on slow action throttle i have been looking at the Amal T80/200 online i think i have a fast action one on it now ether that or im way too ham fisted to ride a bultaco, It would be nice to slow things down a bit, i was thinking i use to throw one of these around when i was 16 now im fighting to hold on to it ........ things have changed in 30 years is the 325 much more of a hand full than the 250. Im very happy with the way my Bultaco looks i will get a set of side cover stickers i think thats a good idea and i think its going to take some time to get use to letting the engine do the work and trying to keep control of the extra size waight and power of my bike, i ride my mountain bike on alpine single track in my free time so im happy off road i have been to watch 3 trials and they still look like lots of fun i have had a great time just watching and taking photos BR

Well here is 2 photos of my 199A its taken me some time to get it back together and i still need a few bits, i had a bit of time over Christmas & New Year so spent as much as i could working on my bike, i need a new throttle but i will be ordering on line so any tips on which one to get would be a big help also i have the Amal levers and its a bit of a reach to reach the blade feel nice once i have got my fingers round but would be nice to have a dog leg blade on them is there any that fit or do i need a new levers. Well thanks for all you help with every thing BR

Thank for your feed back Bondy BullyLover Boghopper350 it always a big help to find out what your finding works best for you I almost have my bike ready for a test ride will let you know how i get on BR

Hi Guys Thanks for the feed back

Or is there a better 2T oil for my bike Thank you for any feed back BR

Hi Scot Taco I was thinking about getting the Magical fork springs and adjusters for my 199A but the website in the uk went off line and stayed off line, every one seems to be happy thats fitted them to there bikes they are a progressive spring i went to look around a twin shock bike shop and they had a set of HFS trial expert suspension kit its a replacement for the standard springs, the kit came with a manual and looked well made to me so i ordered a set for my bike, they have 3 kits that they make to fit bultacos. BR

Hi Nelly I have had a good look at it the photo at 100 % zoom and im not sure i think he would be better to settle up in the bar if he has a less than 50 % chance of winning ....... But he is feet up until the moment in question. Got some of you i think ? not really sharp i could try to blame it on the rain or may be you were just too fast for me

Just a few more when we set out in the morning it looked like it was going to be a nice sunny day but it turned into changeable ...... heavy showers with a bit of hale just for fun and a good bit of mud to make it even more fun i love mud ...... The sun did come back from time to time great day. great venue for an event. last 2 are of a nice Bultaco. BR

Here are some photos i made at the the trial on the 9.11.13. a great day out i seem to spend most my time looking at the bikes and watching which line the riders take, always good to take the camera.

I think every ones mind sees a great picture they would like to capture. If you have a really good understanding of how your camera and lens work together to capture that image then you would understand how to set up your camera, and the best places to stand or just have a fun day out rely on the camera working it all out for you and being lucky. Autofocus has really changed the game digital has made it even more fun BR Nice photos Solit Freewheel

I use to have a tough plastic one on my 198 see photo and i have extra side bits welded on to my 199A bash plate Sammy Miller use to sell them i never saw any one else with one so you never know they my still have some hiding away. BR

Hi Bondy is this the one you have location wigan £ 29.99 looks good what do you think <p> Click to view larger image and other views Fork Seal Conversion Kit Bultaco Italjet Fantic Montesa Ossa Twinshock trials Thanks for your help Bondy BR

Hi Bondy Thanks for the info and photo they look good to me

Thanks Guys and Bullylover for the feed back on the fork seals

Hope you are all having a great summer I planing to change my fork seals on my 199A have looked around a bit on here and Pyramid Parts UK may be the way to go ? they list bultaco but when i use there search it came up blank when i but a date of 1979/ 77or 76 is there a part number i can use please How are there seal kits is every body happy with them are they the ones to fit, is it best to use there Fork Seals & Dust seals kit or just the fork seals and us the bultaco dust covers or go nuts and use all 3 Is there other places to shop on line had a look on ebay but would like to shop in the uk Thanks for all your help BR

I think the showmanship of a stop balance hop .... added suspense to the movement through the section of the rider and its great to watch, but its also great to watch some one forcing a bike to keep moving through a section to. To me it looked like he was trying to keep moving in the first vid Edited because i wish i was wise enough not to comment

Hi Pschrauber hows things hope your having a good summer its been really hot here in Waills and im a 1600m I have a 199A with FEMSA ignition on my bike the flywheel has a squarer edge to its face i have attached a photo after looking at the photos woody sent me links to i think it may be the one that should be on the bike ? fitted a new standard gear box sprocket cleaned it all up and put it back together. got the bike from a local Yamaha dealer / MOT shop, it was one of the owners bikes. Im happy with it. All the best BR Sorry i forgot to ask do they balance the flywheels so they are the same weight on both sides of the crank ignition and clutch side thanks for all you feed back

Hi Guys Look like a fun days riding

Apart from about 2 months ( may be 3 this year were hopefully its above 20 degrees ) its the other way round for us its all about staying in the mid day sun and rapping up to keep warm.