Jump to content

adam

Members
  • Posts

    37
  • Joined

  • Last visited

Everything posted by adam
 
 
  1. adam

    270 Rev3 Gearing

    what would be standard gearing for a270 rev3
  2. adam

    Little End Noise?

    did you change the gudgion pin
  3. adam

    Beta Reed Spacing

    thanks for the advise everyone. i fitted the boysen reeds today but the main reason for fitting them was i thought my original reeds were worn . because the bike was ticking over realy high and if i turned the tickover screw down enough to slow it up it would stall this was why i changed my reeds but the problem is still there . i spoke to someone today and they seem to think it could be a leak from the crankcase any advise please
  4. adam

    Beta Reed Spacing

    thanks for the advise addict. ive ordered some boysen reeds cant wait to try them now i think il try it without the spacer and change the pilot jet also and see the diference . i recognise the stream in your profile picture is it up the rhonnda theres some good rides there. thanks again
  5. adam

    Beta Reed Spacing

    i was wondering what spacing your reed block does to the power . does it give more bottom or top end power. because there is a alluminium spacer between the head and reed block . on my rev3 270 and wasnt sure if it comes as standered or its been added
  6. adam

    Beta Rev3 Tickover

    thanks for that joe. i have just checked my reeds and there is a gap of about a mm where they are not shutting i gues this could well be the problem. think il order a set of boysen reeds. thanks again
  7. adam

    Beta Rev3 Tickover

    my rev3 270 has suddenly started ticking over realy fast. when i turn tickover screw out to slow it down it stalls. i have cleaned carb and filter and checked airbox and throtle cable has freeplay also checked the timing hadnt moved but all seems fine. any advice would be great
  8. i agree sounds like waterpump . i was told when left standing for a while the coolant wears the waterpump seal a lot quicker best of luck
  9. adam

    Heavy Clutch

    have you tried bleeding it .back bleeding with syringe works best for me
  10. adam

    Rev3 Fan Not Working

    my fan on my 07 rev 3 just suddenly stoped working. tryed bypassing the switch but still no life. any suggestions would be cool . chears
  11. IF YOU HAVE TAKEN THAT MUCH WATER IN I GUESE ITS A FULL STRIP DOWN . MY MATE FLOODED HIS A WHILE BACK HE TOOK YHE OLUG OUT AND HUNG IT FROM ITS FRONT WHEEL OF HIS GARAGE ROOF FOR AFEW DAYS TO TRY AND DRAIN THE WATER AND LUCKY ENOUUGH IT WORKED
  12. if bleeding the clutch hasnt solved it i think ur plates might be worn. if you have got pressure on ur leaver wen u pull it in then change ur plates. i dont think it can be much else hope this helps
  13. yo betapete my way worked atreat . i think diferent people ave diferent results and its wats works best on ur bike brakes and clutches r a nightmare
  14. adam

    Boysen Reads

    just fited boysen reads . wat would be a average setting on the air screw on carb. and does the mixture change any info would be cool chearssssssssssssssssssssssssssssssssss
  15. i had a 04 pro and it was a nightmare to do. make sure u got no fluid in the system at all. then back bleed with a syreinge mine worked atreat . u might av to blead as normal after just to get thje presure best of luck dude whoever invented brakes i think its just patiance stik with it dude
  16. adam

    Debbie's Progress

    were theres blame theres claim dude
  17. adam

    Gasgas 280 Pro Carb

    how bigger hole do u put in it chears.
  18. u will never forget to ride . just enjoy it
  19. adam

    Tyres

    stik one on for the rhondda one day trial this sunday dude
  20. why dont we see the top ten world riders ride the scotish six day. is it because its totally different riding skills. i think so i think dougie would win every time
  21. when itook the filler cap of my coolant today inoticed there was white milky patches on the top. ichanged and refilled but when i ran the bike for about ten minutes and took cap of again the top of the coolant had gone white again. any suggestions would be appreciated.thanks
  22. dougies been the best for so long its gota come to a end some time. i think he shoud stick at wat he nows best 2 stroke i think hes up against some younger and harder competition who can addapt to a four stroke a lot quiker but in my eyes dougies still the main man of trials
  23. anyone out there ride in the rhondda valleys
  24. just joined also still trying to suss it all out just like my riding andy from the rhondda south wales
  25. adam

    Evo 4

    Heard a rumour from a good source that Beta will be sourcing 4 stroke engines from Honda, presumably the same ones as in the 4RT Mont; or potentially going down a fuel injection route with the 2 stroke to reduce emissions. Sound a little far fetched, but you never know.
 
×
  • Create New...