Yamaha

I am looking to improve the front brake on our TY175 and am thinking of converting it to disc. I have been looking for a front end off a broken Gas Gas or similar. Have any of you chaps carried out such a mod and have you any advice? Thanks Eiger.

tank/seat cover and fender on ebay. for 94 TYZ? http://cgi.ebay.com/ebaymotors/ws/eBayISAP...&category=34284 k

I'm currently using a ty175 with a WES exhaust fitted (no silencer box) For some reason it keeps destroying spark plugs (whiskering).So we have gone up to a hotter plug but still it destroys them it also doesn't run cleanly at the bottom end. Apparently the previous owner had the mains and big ends done and it was rebored to first oversize, however the piston currently fitted has square shaped skirt ports which i am told is the piston out of the yam dt as the ty pistons (which are apparently no longer available) have round skirt ports has anyboby got any knowledge of what plug or piston should be in the bike or any ideas asa to the problems we are experiencing many tha…

does anyone know of a good site where I could find a stock 84 ty seat. The bike currently has a "puffy" enduro style seat, but I would like a small stock seat. The bike is a 350, but a 250 seat should fit as well. Thanks

A fellow trials rider (a very competant one!) has a TY200 Majesty. Although the bike goes OK (he is also a good mechanic), he feels the standard airbox is limiting the performance. He has fabricated a replacement, but still thinks the airflow is stifled. Someone suggested fitting a 'boost box' (possibly from a DT175) Has anyone any experience of this? Thanks

My Pinky is going to have a full stripdown and service at the end of the month, two names spring to mind for the engine work...Nigel Birkitt or Mick Andrews. I know NB is still about cause I saw him at a trial on Saturday, but what of Mick Andrews?? Anybody got any contact numbers?? cheers guys

I have just bought a TY175 and the engine frame No: ends 978 does that mean its a 1978 model, the tank is white & orange? And were would be the best place to get bits ie back mudgaurd for starters. Considering that I now live in New Zealand

i have a yam ty250 1984 i am 13 years old and find it quite heavy and would like a newer bike but i absolutly love my TY its an extremly fun bike and does ok in trials plus it never breaks like newer models do! does anyone else have one of these bikes? cya richard longstaff

Been having a little trouble shifting into first gear on my '74 TY250. Seems that I have to push down hard on the shifter to get it into first gear. It upshifts OK, not great, but it's the down shifting back into first that is the big problem. I noticed in the manual that there is an adjustment set screw on the clutch side where the shift shaft comes through the case and operates a little cog that aparently moves the shift forks. It didn't really tell what it adjusted or how to do it. Does this adjust the way the shift forks engage or the shift drum or something? Could my shifting problems be as simple as this needing adjustment? Any help appreciated. The gears don't gri…

I am in the process of preparing a Majesty 200 using an old TY175 as the donor to the Majesty frame, tank and other bits I have acquired. However I have just realised that the TY headset bearings are different to those that are required on the Majesty. The frame (I am reliably informed) is the Mini-Majesty type as the front downspars are straight and it uses the original bolt-on 'remote' TY footrests. Do any of you folks out there know the correct bearing numbers for the frame? I am getting desperate to finish the bike in time for its first outing on April 4th when I hope to be competing with an arch rival and a large sum of money is involved!! Eiger.

does anyone know what year & model this 175 in the attachment is ?

does anyone know what year & model this 175 in the attachment is ?

Got a fresh bore, 1st over, and piston for the TY and was wondering what the best way to break it in will be. I want to do it right so I won't have to mess with it for a long time. I have other bikes to work on, this bike is for riding!!

Came from Shirts apparantly, I can only presume there from GAS GAS stock. Weld straight onto the frame, has anybody else done this mod? if so how much were the footrests?

I need a set of rings for a standard bore '74 TY250. The rings are obselete at Yamaha. Anybody know of a part number for some rings that will work and are available?

Hello I have recently acquired a TY175 with a Whitehawk frame. Apart from the tank decel it appears totally original including the one piece tank/seat unit embossed with a 'W', Thing is, I'd like to know a bit about 'Whitehawk', as in who/where/when etc. All I have seen is a posted pic from the original brochure. Any 'enlightenment' would be appreciated. Thanks Paul

Trying to get the cylinder head off my TY250. I have beat on it with a rubber mallet and gently pryed on it with a pry bar but it won't budge. Any advise on how to get it loose?

Does anyone out there have a TY250Z two stroke aluminum frame Yamaha trials bike? What do you think of it. Is the engine the same as the Yamaha 4 GG - AxC = 74x58 on the new Scorpa? Does anyone know why it was discontinued, or where it was available?

Hi.... My dads mate wants to start trials and my dad has found a mint yamaha ty 250 im not sure what year it is early '90s probaly.Is this a good bike for a begginer? Cheers danny

I have just purchased 2x ty 175 c's they run ok with the choke pulled out but wont run with the choke in. Has any one out there have some helpfull tips they might share with me.The autolube is still connected to 1 of them and seems to work ok is it wise to leave it connected being so old i'd hate for it to stop working.Any help would be greatly appreciated. THANKS MARCO