Skip to content
View in the app

A better way to browse. Learn more.

Trials Central

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

OSET Electric Trials Bikes

  1. Started by 250brider,

    Has anyone found a "stickier" rear tire for these amazing little bikes? I have ordered a Shinko 241 in hopes, but can't seem to find any reports on any tire other than the stock Cheng shin.

    • 0 replies
    • 1.3k views
  2. Started by PAULIE,

    Hello, Liking this bike a ton! Has anyone swapped out their stem for something that has a little more rise and a lot less reach? Looks like ~50mm offset and 0 degrees of rise on the stock stem here... this has much less offset, and some rise too... ...enough rise to clear to the blue comp clicker ( I think ) What do you think? TIA

      • Like
    • 3 replies
    • 1.6k views
  3. Started by studioab,

    Hi guys, Instead of mounting Shinko 241 19x3.5 tire, I really would like to convert rear tire to 18", it will allow me to find better options for rear tires. I'm aware of rear wheel conversion kit, but it is 17" and selection of tires is very limited, on top of that OSET doesn't have them in stock. Here is what I found on US Ebay: https://www.ebay.com/itm/WM1-1-60-X-17-36-hole-Akront-Italian-style-flanged-alloy-vintage-motorcycle-rim/164154392242?_trkparms=aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D225074%26meid%3Dd1673bbf4ee14b7aabf24322216eb53d%26pid%3D100167%26rk%3D1%26rkt%3D15%26sd%3D163655745238%26itm%3D164154392242%26pmt%3D0%26noa%3D1…

  4. Started by Elsinore76,

    Have brought the Shenko “19” 3.50 back tyre to put on my 24 Oset haven’t fitted it yet and just wondering if I could have some thoughts on this the Shenko was $30.00 as opposed to $600.00 for the 17 inch wheel and wider trials tyre from Oset , I only use the bike for trials and it’s great but looses a bit of grip with stock tyre, would I be better off with the 17 from oset or the Shenko, the Shenko will change the gearing a bit !!!! Thoughts

    • 1 reply
    • 3k views
  5. Started by a7bas,

    Hi guys, I have just bought a new oset 24r, the standard Sram brakes on my bike are shockingly poor, I appreciate they are brand new discs and pads and will need to bed in, just wondering how long you guys took to get any power in them to pull a stoppie or to generally lock the brakes on? Or if anyone has the same problem or some tips?

    • 5 replies
    • 3k views
  6. Started by Yjo,

    Hi folks, my son was riding is OSET today and it appeared to go into limp mode (no buggy as I thought it had just over heated) but then it started make a funny noise from the motor area...I noticed that the D Link sprocket was slightly loose and wondered if was just that or if it was something more serious. I've posted videos as its easy to understand. Thanks for the advice in advance https://youtube.com/shorts/U8uOQKF3z_E?feature=share https://youtube.com/shorts/ao0R2aY6TJc?feature=share https://youtube.com/shorts/2flpOSULZIE?feature=share https://youtube.com/shorts/-kDAHr5nywA?feature=share

    • 0 replies
    • 1.5k views
  7. Started by efi64,

    Has anyone gone from 24v to 36v ? My son is 8 and has been riding his 16.0 24v for more then 2 years. He rides well but finds it hard to lift the front wheel. Does the 36v. have much more torque making it easier to lift the front wheel ? Thanks.

    • 6 replies
    • 7.5k views
  8. Started by jamersby,

    Hi guys, I will ask the question on this thread as it to do with electric bikes, and the question is what is a 25Kw motor bike ? my friend is filling in a license application form to obtain a motor bike license in which one of the tick boxes reads are you applying for a provisional license to ride up to a 25Kw bike he asked me how big is that, but I don't have a clue, does anybody have any pointers on this.

    • 3 replies
    • 3.9k views
  9. Started by gwl3,

    Just got a new 36v Oset . I've been charging the batteries as directed in the owners manual but the battery life seems poor . The life just drops off the edge of a cliff after about 30 mins of general "section" riding in the local flat woodland . Strictly no wide open throttle MX riding . The battery indicators wouldn't go past the 2nd light as the performance dropped off but the bike was crawling at about 3mph . Even when the bike ground to a halt and stopped it showed 2 lights on the throttle . Our old 24v went 3-2-1 empty . Even our new 12.5 out performed the 36v by dong 2 rides on 1 charge as opposed to the 36v 1ride - 1 charge . Any clues or theories would be help…

  10. Started by ktm450,

    Hi I have a 16.0 24v oset will a 36v motor and swinging arm fit. From what i can see the frames for the 24v and 36v are the same, but the swinging arm seems to be 3mm to wide. Thanks DAZ

    • 2 replies
    • 2.6k views
  11. Started by dave horne,

    The Yeadon Guiseley club will for the first time be setting out a seperate E class route, along side their usual conducted course at Addingham Moorside tomorrow. The route will be suitable for both 12.5" & 16" bikes. More confident E class riders can still follow the normal small wheels course. The conducted trial starts at 2pm.

  12. Started by jonnybmac,

    Reading on the oset website it says theres becoming a wide variety of aftermarket parts available and alot of bike parts to suit the oset. Has anyone got any websites that do oset aftermarket parts, or know of any parts that would suit the oset from bikes? I wouldnt mind fitting disc brakes and hydrolic levers onto the 12.5, is this at all possible?

    • 4 replies
    • 5.6k views
  13. Started by frogger,

    If anyone has done an air shock upgrade on a 16 Oset, could you please post details/pics of the shock and modification needed? Trying to shave a bit more weight off the bike for my daughter. Also, if anyone knows how to soften up the fork that would be useful too. Much obliged

    • 2 replies
    • 6.5k views
  14. Started by juanroberts,

    I had Paul Master replicate his build on my 20.0 and it rides like a dream now. I had bought a first generation 20.0 that was unrideable. I even got a new controller from OSET and it helped, but still was not any fun. Paul is known in our trials club as the EcoTrials guy because he made an electric trials bike from a Montesa a long, long time ago. Then he did it with a 20.0 about 2-3 years ago. He uses an Alltrax controller that can manage huge amounts of current (designed for a golf cart) and is programable, in tandem with a Magura throttle. The mapping is so tame and predictable off the bottom that I can perfectly control and balance on turns now, and it ramps up to…

  15. Started by Adamd,

    Ok I have just bought my son a 16 racing and want a spare set of batteries, can't really justify buying a boost battery at the moment, can anybody point me to some decent standard batteries online? Thanks.

    • 2 replies
    • 1.7k views
  16. Started by observedtrials,

    Can anyone write up a comparison between the 24v and 36v Oset. Especially with regards to how long the batteries maintain a charge. Thanks, Mark

    • 5 replies
    • 3.2k views
  17. Started by petrg,

    My 7 year old, is after trying his hand at a Trials comp.. I noticed last year there was an Oset Cup being held somewhere. Does anybody know we're I can enter my son in a junior Trials. I am based in the North West Uk. Warrington area. Regards Peter

    • 9 replies
    • 3.9k views
  18. Started by jonnybmac,

    Thought this might intrest a few people who's kids have balance bikes. http://stridercup.org/ heres the one I'll be entering at manchester

    • 0 replies
    • 2.5k views
  19. Started by Adamd,

    Ok so bought my son I used oset 16 racing yesterday, after we got home he spent a good hour or so riding so I put the bike on charge, standard bartteries and charger, went to it this morning and I could smell the batteries, anyway they are now dead hot and swollen up, surely the charger would cut off when they are full? Is this my fault for leaving them on too long or a battery or charger error?

      • Like
    • 16 replies
    • 7.6k views
  20. Started by scottwitting,

    Hi, my son managed to outlast the batteries on his 12.5 Oset yesterday so I'm considering getting him some spare ones. These are the options I have:- (i) ones from Oset, say they are 8Ah, can see from the picture they are Ritar brand for

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.