Gas Gas

I ride a GasGas txt 250pro 03 and the clutch feels very hard to push with one finger although I have quite strong fingers(due to my climbing career). Any ideas what might be the problem?

Evening all. The rebuild continues on my dad's 2002 txt 200. I got it with bits all over the place and am now wondering on the correct locations for stuff like CDI, voltage regulator, coil pack etc. The space between fan, bottom of tank and spark plug is pretty tight so seems it all needs to go in a certain way. Anyone have photos of their set up? Ta!

Hi I’m new to the trials world and having issues with my bike, not idling. I’ve cleaned carb, filters etc and suspect crank seals but cannot find them anywhere please help

I decided to go through the Gas Gas JTR shock absorber, how much oil to pour into the shock absorber? And tell me about the settings, how many silk do you need to do? Rider weight 60 kg I apologize for the tex, I am writing via google translator

Anybody know which way up the shock in a 95 JT 250 should be, or does it even matter. I think when I removed it, the blue damping adjuster was at the top of the shock, and the preload adjuster at the bottom. Is this correct. And has anyone rebuilt one of these, ie. drilled and tapped the body of the shock to replace the oil? Thanks in advance, Alan.

There are incorrect descriptions both in the paper manual that came with the bike when new and also the PDF owner's manual for 2006 Gas Gas TXT Pro. I noticed this the first time i had a look at the manual. There might be more wrong stuff in the manual for what i know. Is it typical for Gas Gas to have incorrect info in the owners manual? Does other years of Gas Gas TXT have incorrect info as well? Have a look at the 3 pictures posted below. The pictures below is of page 20, 22 and 29 in the manual.

Hi I have the exact same bike as my friend only my rear suspension has some bounce about it and his doesn't.we have noticed that his has been been put on the opposite way to mine would this make a difference to how the suspension works and if so how difficult would it be to turn around?any help would be great thanks.

can you get just the rubber oring washer thing and clip on their own as the plug is fine. if so where, links please

So i found this bike for a good price I'm picking it up in a few days. It's going to be a spare bike so when buddies come to the house they have something to fool around on. It was listed as a 2013 and my first thought was the seller was just incorrect on the year. The more I research i think it actually is a 2013 (10th character of VIN is N). I think its some kind of economy version that used old left over frames and cheaper suspension and brakes. If that's true I don't know anything about this version. Can anyone fill me in on details? Specifically the suspension and brakes?

Hi, I need a new master cylinder for my 2005 280 pro, Will any trials bike M/C fit and work ?

Bonjour mon cable des gas est casser juste au bout .ma question peut on en faire un sois même car 30 euro plus livraison c'est cher. Merci de votre aide

Hi all, I've have just bought a 2008 Gas Gas 125 racing.its In mint condition and rides great. Are there any problems whith this year I should look out for. Are the oils that I used in my sherco good for this bike or what would you reccomend.and any general maintenance tips would be great Thanks, Ben

Does anyone know if modern plastics will fit a 2000 gas gas txt

my mate has a 1999 tx249, it has had a front end impact. he needs fork stantions and a front wheel. where would be the best place to look for these parts? and how much are they likely to cost. he's not bothered if they are second hand. cheers Ben

Hi, recently my fan has decided to engage as soon as the engine is running, thermostat gone? or is there any other common faults? cheers

Hello all , first post here and its for some help....hopefully I can explain this correctly I bought my young daughter a gasgas txt50 boy and after doing some googling I am getting conflicting advice (from gasgas dealers and owners) For gear/clutch oil im being told 10/40 engine oil OR 75w gear oil.......the problem is ive tried both and getting different problems with both. heres whats happening Engine oil - bike sounds great , gear engage is great BUT the clutch slips really bad to the point it is unridable gear oil- the bike runs and the engine pulls really really well BUT in netural it will randomly jump into gear and lurch forward by …

I recently bought a Gasser 125 Pro. I have replaced the piston, rings and little end as it was a little noisy. The starting remains poor. When it's cold, no problem at all, but when hot it can be a dog to start. Strangely, adding choke when hot cures the problem. I've tried adjusting the air screw, whch made no difference at all. I haven't stripped the carb yet, or changed the plug, but I do wonder if: 1. This is a common 125 problem, and 2. Whether a larger pilot jet will help to richen it a little on the bottom. Any thoughts, advise or comments on similar experience welcome! Thanks

Hi all could anyone tell me the best 2 stroke oil and mix ratio for the 70 rookie . New to us bike and not sure of mixture. Regards Neil

Hi there, as an inexperienced trials bike owner I'd like to ask for some help. I have a gasgas jtr 160 1993 that needs a new Kick start lever. I have seen second hand ones online but they all look really well used and possibly worse (looser) than my current one. My question is! Are there any other kickstart levers that will fit a 1993 gasgas jtr160. It has the smaller original spline (not 16mm) any help would really be appreciated

Hi, Does this bike has an waterpump weep hole, and where is it located? This bike has a small coolant leakage on the front engine case. I'd removed the skid plate but cannot find any coolant weep hole. I know there is 1 (oil) weep hole near the stator cover. And does anyone has an technical manual about this txt50 boy? Greetings from Holland.