neo

Best of balance (is what's really needed for tight turns). Neo

Now you're talking!!

So it looks like welding is out. I don't suppose anyone has that left hand Jitse Peg??? Best of balance. Neo

Thanks for all the feedback guys. I

Hi All, Some of may have seen my post in the wanted section of TA. http://www.trials.com.au/phpBB3/viewtopic.php?f=8&t=3925 But I

Hi All, I'd appreciate it if you could pass your comments and experiences on the update on this..... TA - 06 Crack Best of balance. Neo

Thanks for all the input. I was planning a trip to the northern Territory over Xmas....wifes not so keen now, so it's all gone cold :-( Best of balance. Neo

Thanks bikespace Best of balance. Neo

I looking to ride in a MUCH hotter and humid climate than Sydney....so I do not jest I'm affaid "That's about it."....no I don't think so.....there's always a better way..... Just need to find it Best of balance. Neo

I can now confirm that it is the same as the 06 Shock. Best of balance. Neo

Which number works out best for the Swingarm?? Best of balance. Neo

Thanks Guys. I have ridden in some hot weather before but got to exhausted too quickly. But I'd noticed that if I could keep my upper back and middle spine cool then my brain was happy I have an idea to use some form of Camel Back with ice packs in along with a Artic Heat Neck Wrap http://www.arcticheat.com.au/new_products.htm But does any one have any other ideas along these lines? Best of balance. Neo

Sorry smalley.....I left the UK behind 16 years ago and I haven't looked back since. Trials and Life is all about balance. Neo

This might be a question for those of you in warmer climates. But how do you guys keep cool when you ride in the heat? I may have the opportunity to ride in that kind of climate soon and I was wondering how I would survive the heat I've considered something like this :- www.arcticheat.com.au Anyone ridden with something remotely like this? Best of balance. Neo

Hey Howard...Got the exact same problem on my 06...now with a Cabi Replica shock......now your normally the guy with all the best answers Best of balance. Neo

Hi copemech, I think it was you that put up a post some time back about fitting an 07 hock to your Sherco and were not clear which way up/around it should go? Anyway. I bought an Cabestani Rear shock off of eBay a couple of weeks ago. But I can't see how I can fit it and make the rebund adjusting screw easily accessible on my 06 250. At the moment I've got it fitted at the top. towards the exhaust box. Which really means I'd have to remove the exhaust box (or Air Box) to get to the screw. Am I missing something??...or was this an odd way to design a shock? Best of balance. Neo

My one is STILL holding Best of balance. Neo

My advice....from my own experience....if there's any corrosion at all anywhere......you can stuff around until your blue in the face. But the problem will always come back within a few weeks. Throw it away and buy a new calliper .....these are brakes....it's just not worth the hassle or the risk. Best of balance. Neo

Would you really go out and buy a "use it once in a blue moon" new tool, instead of removing the rad??? I've messed with the timing on an 02 Sherco many times.....Without a dial indicator (or anything else for that mater).....It's not that big a deal. .... Just don't adjust it too far either way. Check for hot running if retarding. Then ride it on a section to see if you like it. Best of balance. Neo

Interesting point Wayne.....When is Sherco going to update it's Trials bike manual??? Best of balance. Neo

Hi Copemech, Is this what he can looks like? TA Website From what I've seen on the web. I'm not sure if they are still producing the Semi-flat-black any more?? Best of balance. Neo

Hi all, On my 06 Sherco. Are the radiator hose clips reusable once they

Just to let anyone know that 406 Loctitie did the job perfectly on my O6 Sherco Tail. There is another product call Q-Bond which I got from Repco (in Australia). And ended up fixing my daughters GG Airbox with. But Q-Bond comes with some crystals which can be used to support the break your trying to fix. By pouring the crystals on and then dripping the glue on too. Anyway I used the Q-Bond crystals with the 406 Loctitie to fix my Sherco tail and it's still holding strong after about 20 rides.....Considering the break is right on the bend of the tail. This is not bad result (406 Loctitie and Q-Bond crystals) , I think Best of balance. Neo

Hi Copemech, Is that Krylon emi-flat black in the "RUST TOUGH" range or the "DECORATOR 5 BALL" range?? Best of balance. Neo