jsp

the new factory replica bike is called a combat but the ice hell model has been used as the base of the bike

thanks evo boy, I just cant make my mind up weather to have one or wait for the 18 ice hell's ?

no but I know someone that's contacted them on friday and they said all the details would be out the start of this week, I would have thought there would have been a head line on on this page with the photos and details

still no sign of a price or a spec on these factory bikes ?

http://www.vertigomotors.com/en/news/new-vertigo-combat-fajardo-replica-limited-edition-id-86.html sorry I stand corrected its coming in 250 & 300

shame looks like its only coming in the 300 version

its howards glory hole !!!!

I run my ossa on 50ml of oil to 5 lits of fuel

didnt they used to fit them as standard on the TY250 rear mono shock suspension ?

I always fit a grease nipple into the head stock of bikes I have, then after washing a quick pump with a grease gun till I see the old grease coming back out

contact Dominik on the email below and he will sort you out info@tpczech.com

brilliant thanks

so is the power supply already there ? Ossabc63 can you post a photo of your set up ?

I think there is a level sensor in the tank on the rear brake side near the throttle body, but I think the wires just end up behind the light, you could buy a small light to act as a low level sensor but I dont know how it worked

Well I'd be in the line for another one, I love mine parts are still available in the uk, and if your struggling Joa Hindren has a good supply in Finland

I had a go on a std 280 over the weekend and it rode really nice

mine came with all the o rings in place as per my drawing and then a bag with the spares in, the 90 deg zerk did come fitted but to the front shaft up behind the bash plate so I've moved it to the middle bolt, but I've not had time to finnsh building it back up so I'm hoping once I get it all back together there will be some clearance for the zerk in the middle bolt

yes that's great thanks, mine came with o rings fitted on both sides of the dogbones which I have managed to get on and in, but like you say you cant see if they have been crushed or not. I did also get a full new spare set in the kit

sorry for all the questions and the poor drawing, but where had you added the shim, and are you adding it to extend the centre bolt slightly to give it a bit more play ?

I've found out there a m6 x 0.75mm thread which I've manage to track down and order some spares

no thats ok, is the 90d nipple close to the frame ?

lotus54 my rear end has come this week did you think of a better way to describe the shimming, and if possible a photo of the 90d zerk fitting in place as it looks like mine is going to catch on the frame behind the foot rests

I all ways use electrical silicone grease in all the connectors

New sticker kit fitted this weekend, just not sure what to do with the wheels the front one has the factory rim tape on and the the rear is my spare wheel with the s3 rim tapes. I have got some rim tapes in the sticker kit but they only cover half a wheel

thinking about it one of my mates has just got a milling machine I might give him one to copy