Jump to content

Beta rev'3

Members
  • Posts

    44
  • Joined

  • Last visited

Everything posted by Beta rev'3
 
 
  1. I've just been cleaning my nitro's battery compartment and pressed the test button on the battery and theres no lights on... With never owning one before I would imagine that the battery should hold some charge? and any ideas or how to diagnose what the problem is? Anyone got any experience in this as there's absolutely diddly about it in the manual or online about it Thanks in advance Mick
  2. I think It was a pop & stall but it's the same thing every time I do It
  3. Thanks for the info guys, how easy is it to set a Tacho up to check the idle, I wouldn't say I was a natural mechanic...if you know what I mean 🙃
  4. ok thanks i'll take a look at the tickover.
  5. After spending my life on Fantics and then Beta's I decided it was time for a change. The bike sure does make you smile when you get on it but I seem to be good at stalling it and make a good effort to go over the handlebars, another good one is remebering to keep it topped up because of the lack of reserve tank. The front end does seem heavy compared to my beta Anyone got any tips on how to not stalling it etc? Thanks In advance mick
  6. yeah I liked it...anything to do with trials is a good thing as long as they keep the content up.. which I imagine is quite challenging at times.?
  7. yeah I've watched a good few of his theres some pretty handy riders ?
  8. Ok i'll take a look this weekend...thanks
  9. Hi everyone, I've looked on the trial GP website and it says that Freesports do a catch up on the rounds but can't see it on their TV listings page is there anywhere else that shows it like The X-Trial package. Cheers
  10. sorry only just picked this up, thanks for all the info fellas, much appreciated Overdale for the description. ?
  11. my 19 evo 250 has started blowing water out of the vent occassionally the fan is working ok, Is this the norm ? the last one i had was a 2006 Cheers in advance M.
  12. Beta rev'3

    evo fork seals

    hgas just done my 19 evo...twice... they're relatively simple to do..turns out the fork leg is scratched and that's why the seals leaking... fork legs aren't cheap so it's bread and water for me and her in doors for a few weeks.. I think the right leg was 297 ml if I remember correctly. I watched the above vid by bilko and theres another good one which shows how to make a fork seal driver but I bought a sealey one instead which was around the 40 quid mark I think. Best Mick
  13. Hi Dan no they weren't overly clean on closer inspection, not sure about the groove to be honest I didn't notice it till you pointed it out..I'll put them back in now I've cleaned them up and see what they're like.
  14. I've just done a service a first service on my '19 250 evo so decided to take a look at the clutch...to be fair the plates are very clean. Did anyone ever find some lighter springs with regards to lightening the pull over here in the uk ?
  15. Ok cheers for the info everyone. Appreciated
  16. So after a reasonably impressive off at the top of a step at weekend, Not sure whether it was the shock of actually getting up it but stupidly I wasn't covering the back brake and looped the bike, with me and the bike back at the bottom of the step where I started from with it on top of me.. I'm buying some back armour seeing as all of the rest of me escaped major pain thanks to knee and elbow protection I've looked at the Hebo XTR and the forcefield but there are quite a few versions ? Any pro's cons with either ? Thanks in advance
  17. I've done the deed...thanks ? The missus thanks you all as well....NOT ?
  18. cool. Thanks looks like i'll have to treat myself ...
  19. whats the coverage like I've never seen this before ?
  20. Thanks for the advice everyone it's a '19 Evo and the fork with the disc on is leaking oil out of the top quite badly. I can't say as it's lasted so long seeing as the bike was new end of last September...
  21. cheers...bad search technique.. must try harder ? Sorted ?
  22. Howdy, I've a fork seal leaking has anyone used a fork seal driver ? I was looking at the Sealey MS016 35mm-55mm Fork seal Driver..I've never done one before but i've looked at a you tube video on it and it looks relatively simple even to my Limited Mechanics Skill Set...it's a Beta Evo Any thoughts ? Best, Mick
  23. I've not been for a good few years, but I know what the previous comments mean when they say it's time for a change. We did notice that if my memory is right the attendance was down considerably from the last time we went
  24. carole nash will only insure a non registered trials bike with a value up to 5K
  25. awesome..brilliant.. what a night... well done everybody
 
×
  • Create New...