Jump to content

larry s. k.

Members
  • Posts

    144
  • Joined

  • Last visited

Contact Information
 
   
Recent Profile Visitors
 
 
3,041 profile views
 
  1. Hi just under 200 lb 5 speed 10 hp engine 2 cycle , up graded larger rims and new tires engine runs great stock , I tried webco head ran about same , it burnt plug increase comp ,, so changed back stock head ,
  2. Rebuilt new wheels bigger , standard 21 18 ,, from 19 17 

  3. 1970 ish hodaka road road ,, new up graded wheels
  4. Have been rebuilding this hodaka for last few years now runs good really low geared liking new tires and rims
  5. I rebuilt wheels New 21 18 , my old in pile and bent rim I purchased on flee bay. , liking new wheels came out pretty straight to Big sprocket can go under 5 mph in1st My road toad 1970 ish with new license plate larry’s ,
  6. larry s. k.

    larry s. k.

    Rebuilt 18 wheel took a while find good rim match spokes , and lace it up and true , surprised it pretty straight my 3 rd wheel rebuilt cost , to much , got burnt on seller sold me a hammered bent rim ebay from Sniley in oregon , think he had an attitude , or is a drunk ho well lost 100 usd rim is in the used pile , hodaka wheels are getting costly , new rims and spokes from Asia cost 300 usd then put it all together , it’s at standard size now 21 front 18 rear new tires and tubes
  7. larry s. k.

    larry s. k.

    this winter project 2019 has not run for many years I purchased it 2 years ago , was a little ruff , putting it together i
  8. Hi , look ,, frame numbers. , then look up Honda production numbers , cheers
  9. Hi if you look up southwest montesa , they seem to be closed , , do to health ,that what came up , ,,, cheers
  10. Hi just posted piston cylinder in classified section for cota 200 , ,
  11. Hi just a thought , possible. oil was drained out for winter storage , , or. ,, does it leek oil , or blow oil out vent near rear sprocket , , my m73 has vent near rear sprocket A breather vent for crankcase , and was blowing oil when the rings , crank seals went out , it was stored many years , in cold , and froze , but the cylinder was pickled , , it’s apart for future rebuild , cheers
  12. Hi seat , tank , different ,,, sounds like idea cheers
  13. Hi feetupfun ,, my cota engine is together , already assembled , , so what I rember 200 cota is really 175 cc , and has same crank wrist pin of 125 , it’s a small wrist pin , I have ventured into looking into installing other brand pistons into different bike ,, close , not same usually different wrist pin & Bering , // #&% ,,, have seen on internet , if my memory , correct , some one installed a Vespa piston into a cota 200 , with a little matching, top of piston , for deck height , this was years ago , I believe he had it bored to ,,, , now , you have to research all Vespa for the Wright ,, proper wrist pin size ,, , 1 ,, then hope to match deck height , ,, I heard years ago the were going to mf more pistons for cota 200 ,, ya well there not enough bikes out there for them to make a profit ,, I suppose , if you watch ebay check once and while a 200 piston comes up , I know the the Oregon dealer. Had one 20 over , just this last few years for sale And sold it , so there out there , so France trial classic , is selling upon waiting delivery Tarabusi brand piston 63.95mm for E 177.00 you can put your email in for the waiting list , cheers info from larry
  14. Hi ,, I have a cota 200 stached in the back ,, cota 200 pistons are very hard to come by , , southwest montesa , looks to be closed , as of 7/ 19 , due to health reasons no longer selling montesa parts , he left this message , on his web page , I. Called him few years ago , , very helpful , , upon info and ordering parts , SO ,, if you find a piston for a 200 cota it’s rare , there cycleservent in Oregon , states , he has a few cylinders for 200 , , ,,' I working on my bultaco pomeroy replica , 360 assembling a engine , I purchased on ebay eng & frame match , cheers ,, ps ,, just rember , there was a chap eastern central England , that was selling used montesa parts, on ebay , , I don’t rember his name Like , it was about 7 years ago I ordered part from him , on ebay ,,he had lots montesa used parts ,, you might call around bike dealers , repair shops to locate him he had a few 200 cotas was parting out ,, really ,
  15. Hi just love it , we all bike rebuilders have crossed this , problem Woody so right it’s old prob serious froze $$ , , to leave it , or continue , torch , saw electric , , then find vice to remove center , with long thin chizel , easier with helper ,, or , phone local shop, and get estimate over phone , before you go into shock , , I done a few , my little Rickmans , we’re a real test of my nerves , good luck and cheers
×
  • Create New...