Old Gezzer

Hi, If you are in the UK try contacting Westwood Liners. They have a website and are located in the West Midlands. They have a postal service and they will remove the old liner and refit a new one.

Hi, The Notch face in towards the Drum. Must say I have only come across the notched pawls in a 6 speed box.

HI, Many years ago I fit a Stator form a small DT Yamaha. Worked a treat.

Hi, Inmotion in the UK sell new plastic Tanks. And it is possible to get an Alloy tank if you look around. These people may be able to get you an Alloy tank, thy are in Spain but respond to emails in English. "motosdelabeulo.com"

Hi, If you look on Facebook there are a few folks who will reline your hub. Or some one who can point you in the right direction. My mate gets his done in Liverpool and the guy does them with the hub and wheel complete.

Hi, Yes it is possible to Road Register a Bultaco Sherpa on the Road. I have just done one of mine.

Looks Like a Brake Shoe Spring?

Too Short for the Exhaust Spring.

I have a mate in Liverpool who is very good at Rebuilding Bultaco engines. He has just done 2 x 199B's for me. If you need his phone number just message me. Cheers

Honda and the Suzuki are both great looking bikes. Good luck with the Yam resto. 👍

👍

Hi, Make sure the "Muffler" mounting Lug is on the outside of the mounting bracket on the frame.

Thanks for the replys. 👍👍

Just a question relative to this post. Where in the UK is the place to get a Genuine OKO Carb from Please?

Nice looking bit of Fabrication work there. 🛠️🛠️

There is a guy in Liverpool called Chris Bond. He has a reputation as an experienced Engine builder. If you want to contact him PM me and I will put you in touch. Old Geezer.

Have a look at "Electrex World Ignition" I use them on the Bultaco's I restore.

Hi, I have used 3 Rod Kits that Inmotion sell, No problems with the Kit. Bit expensive but if you need one, you need one.

Message Snt.

Hi, Inmotion have them in stock. https://www.inmotiontrials.com/product/petrol-tap/

Why not get it stripped down to big bits i.e. Engine and Frame then crate them up and find some space in a container heading your way. Probably cheaper than an expert export packer charging a small fortune.

Try Inmotion they may be able to help you.

Thanks for sharing your brilliant photo's 👍

Hi, Try these people in the UK, They do a large range of spares. Villiers Services No.3 Merry Hill, Quarry Bank BRIERLEY HILL West Midlands DY5 1SD United Kingdom Email: Sales@VilliersServices.co.uk Tel: 01384 265797

I have never had any issues with remanufactured pistons as long as they are good quality. Italkit pistons are very good.