29r

I'm thinking I saw the future U.S. Champ at the TTC . The kid was good ! http://www.osetbikes.com/

Day 1 at section 11 , Fajardo was staged when Blazusiak let out a yelp . One of the locals came to the rescue climbing up the boulder at the entrance poking around in the crevice with a 6 inch stick . He made the grab and started pulling out a 5 foot snake ( it might have been 4 foot before he started , the snake didn't want to come out ! ) He then jumped off the rock with the snake hanging by it's tail ( snake wasn't too happy at this point ) The look on Blazusiak's face was priceless . Fajardo was shaking his head and muttering something about " Americans " ! He then dropped it into gear and proceeded to clean the section . " Shoot , it wuz jesta Rat Snake , I wuz hopin' it wuz a big ol' Copper " ! He must of been from Alabama .

I was at # 15 on day 1 and witnessed ( One of ) ' Incidents ' . She had a H*ll of ride , but apparently the crowd ( including me ) missed the the roll back . There was some confusion , but fur wuz a flyin' and the minder got into the act to boot . Just before the awards , I observed a heart to heart talk with her / FIM Officials and the orgainizer. All I can , is on Sunday , she might could of talked a Tennesee Highway Patrolman out of a parking ticket . But I tell ya' what . There wasn't anyone there that didn't want to see her kick butt , but I hand my hat to the Observers for stickin' to their guns .

Andy ? Anybody ?

" Don't mess with them Observers ! "

Comments encouraged !

You Guy'uz always got yer minds in the gutter ! What I wuz sayin' wuz , the trailer's locked , I wuz gettin' cocked , and right now my head feels like it fell on a friggin rock ! BTW , the Missus found the key .

YEAH BUDDY ! Locked , Cocked , ready to ROCK ! Oops Ssshh... Don't want to disturb the Misses !

Heh , Heh . " And we just smiled and waved....Sittin' on them sack of seeds ."

[ Adjustable shock red flash on graphics different head porting and front pipe, all definate advantages. Notice there is no pics of the Carb position though. <{POST_SNAPBACK}> You can take the Man from the Sherco , But you can't take the Sherco from the Man !

I'll have the Taxi . Andy rides for free ....Heh,Heh,Heh !

I've got the Beer Cart!

Heh,heh,heh , Hello to you , my friend !

http://master-formula.com/Metal%20Polish.htm This is the best I've found , easy on easy off . To get past coatings and to work out scratches . http://www.imperial-tool.com/scotchbr.htm You have finish it off with a Buff .

Thinkin' maybe the crank seal/ primary side . Lifting the rear is moving the oil to the seal . Justa thought .

Priceless ! Made my day ! You are... a true idiot ! My kinda Guy . :santawink:

THREE CHEERS and ' ATTA' BOY'S FOR ALL ! Interesting watching the Presidents Cup ( yeh , I know it's golf ) but the way they all pitched in to get the job done . Obviously you fellows did the same to produce the fantastic results ! Good job guy's , you done us proud !

Doing a little research ... Roy Bacon's Illustrated Triumph Buyers guide has a picture of a ' Cheetah ' framed Cub ( 1969 ) and mentions that were other firms that made similar models , so it might not be suprising ( rare though )to find an original Otter . Looking at Don Morley's Classic British Trials Bikes , it shows a C15 with a frame conversion built by Scott Ellis ( BSA factory rider ? ) circa 1966 . Quoting ; " It is available today in replica form as the Otter conversion ". hmmm.. Wonder if this would establish precedent for qualification for Pre-65 ?

.... .... It was my understanding that the bush that the actuating arm goes thru is not centered . He asked how my brakes were and I said not too bad ( I had replaced the shoes ) . Then you must have a good one . FWIW

It's been a while but , I talked to a fellow at Serco ( was that Ray Small ? ) He talked about centering the bush on the backing plate . He said that the quality control was not the best and with some , it made an improvement . M2C's

Thanks fer that , Ishy. Looks like I'll have my Sunday covered !

I'll be out to the Sacramento area , June 3-13 for me' niece's wedding . Looks like we'll have some spare time . Any events going on ?

I dunno ' bout that Charlie , Last year at Duluth ,we were camped next to a guy that worked for Evinrude , He was quite adamant about their 2-stroke technology . FWIW , Check out Evinrude's Website .

Just for starters , you might want to check this out . Pretty cool ! http://www.cobratorches.net/